Toshiba TDP-T40 (XGA) owner manual Trouble indications, Before calling service personnel, Others

Trouble indications

The indicator lights inform you of internal abnormalities.

TEMP	FAN	No power
LAMP		⇒ Problem with projector
		•	Unplug the power cord, and contact your dealer.
(Off)
TEMP	FAN	Lamp went out during use, or won’t come on
LAMP		⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of
(Red lit)		the lamp has ended or the projector is malfunctioning.
		•	Unplug the power cord and wait for a short while, then turn the power back on.
(Red lit)		•	If a lamp burns out, replace it with a new one.
		❈ After approx. one minute of abnormal display, the projector returns to
			the standby state waiting for internal cool down.
TEMP		Power went out during use
LAMP	FAN	⇒ Internal overheating, or the outside temperature is too high.
(Red lit or flashing)		•	Place the projector so that the air intake and exhaust are not blocked.
(Green lit)		•	Unplug the power cord and wait for a short while, then turn the power back on.
Or (Orange lit)		❈ The		icon will appear before the power goes out.
		❈ After approx. one minute of abnormal display, the projector returns to
(Red lit)			the standby state waiting for internal cool down.
TEMP		Power went out during use
LAMP	FAN	⇒ Problem with internal cooling fan.
(Red lit or flashing)		•	Unplug the power cord, and contact your dealer.
		❈ The		icon will appear before the power goes out.
		❈ After approx. one minute of abnormal display, the projector returns to
Or			the standby state waiting for internal cool down.
(Red lit) (Orange lit)
TEMP		Power went out during use, or power won’t come on
LAMP	FAN	⇒ The lamp cover is not properly attached.
(Orange		•	Unplug the power cord, and reattach the lamp cover. p.36
		❈ After approx. one minute of abnormal display, the projector returns to
flashing)
(Red lit)			the standby state waiting for internal cool down.
TEMP		Power went out during use
LAMP	FAN	⇒ Problem inside the projector.
(Green lit
		•	Unplug the power cord and wait for a short while, then turn the power back on.
(Green lit or Off)	(Green	•	If the above action will not clear the problem, unplug the power cord,
or Off)
	flashing)		and contact your dealer.
(Red lit)
		❈ After approx. one minute of abnormal display, the projector returns to
			the standby state waiting for internal cool down.

PRECAUTION

• Make sure to unplug the power cord if something goes wrong.

Before calling service personnel

If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.38 as well.

If This Happens	Check
No power	• Is the power cord plugged in? Is it connected to the projector?
	• Is the lamp cover loose? p.36
Power goes out	• Is the ambient temperature high? p.38
during use	• Is the air intake or air exhaust blocked? p.38
No picture	• Is the projector turned on? p.25
	• Is the mute function on? p.29
	• Is the brightness setting minimized? p.31
	• Are the connections set up correctly? p.22
	• Are all the connected devices functioning properly?
No audio	• Is the projector turned on? p.25
	• Is the mute function on? p.29
	• Is the volume setting minimized? p.26
	• Are the connections set up correctly? p.22
	• Are all the connected devices functioning properly?
Picture not	• Is the input signal supported by the projector? p.41 , p.42
displayed	• Is there something generating an abnormal video signal, for
correctly	instance the video tape?
Picture blurred	• Is the lens dirty? p.37
Part of picture	• Is the lens focus adjusted optimally? p.26
out of focus	• Is the projection distance within the projector’s supported range?
	p.21
	• Is the projector’s screen placement angle tilted too far? p.21
	• Are the sharpness or sampling phase adjustments off? p.28 p.31
Image is dark	• Are the brightness or contrast adjustments off? p.31
	• Is the lamp nearing the end of its service life? p.34
Colors too light	• Are the color, tint, R-level, G-level, or B-level adjustments off? p.31
Bad shading	• Is the screen dirty?
	• Is the lamp nearing the end of its service life? p.34
Remote control	• Are the remote control’s batteries drained?
doesn’t work	• Are the batteries inserted into the remote control correctly? p.18
	• Is the remote control being used within the effective range? p.18
	• Are there any obstructions between the remote control and
	projector?
	• Are there any fluorescent or other bright lights shining at the	Others
	projector’s infrared remote sensor?

38 39