Toshiba TLP-B2ultra owner manual Before calling service personal, Others

Page 59

Before calling service personal

CONTENTS

Check the following points before asking for support service. Refer also to “Trouble indications”. 54

 

Symptom

Cause

Correction

Page

The power does not come on.

• The power cord is disconnected.

Firmly plug in the power cord.

18

 

• The lamp cover is not attached correctly.

Attach the cover correctly.

57

The power turns off while

• The ambient temperature of the projection room is too high.

Lower the ambient temperature of the projection room,

_

using the projector.

 

and turn the power on.

 

No image appears.

• The lens cover is on.

Take off the lens cover.

18

 

• The wrong input is selected.

Select the input source correctly.

26

 

• The muting mode is on.

Press MUTE to restore the picture.

30

 

• The “Brightness” adjustment is at its darkest.

Make the “Brightness” adjustment.

34

 

• The source is not correctly connected to the projector.

Connect the source correctly to the projector.

21

No sounds are heard.

• The wrong input is selected.

Select the input source correctly.

26

 

• The muting mode is on.

Press MUTE to restore the sound.

30

 

• The sound volume is at the minimum.

Adjust the sound volume.

42

 

• The source is not correctly connected to the projector.

Connect the source correctly to the projector.

21

The images are blurred.

• The lens is dirty.

Clean the lens. Use a lens cleaner to clean the lens.

56

Focusing is uneven.

• The picture is out of focus.

Focus the picture.

27

 

• The projection distance is not appropriate.

Adjust the distance properly.

17

 

• The projecting light is not hitting the screen squarely.

Adjust the projecting direction so that the light hits the

17

 

 

screen squarely.

 

 

• The “Brightness”, “Contrast”, “Sharpness” or “Phase” adjustmentsMake the “Picture” or “Image” adjustments.

36

 

are not correct.

 

38

The pictures are dim.

• The “Brightness” or “Contrast” adjustments are not correct.

Make the “Picture” adjustments.

34

 

• The lamp life is ending.

Replace the lamp.

57

The colors are faint.

• The “Color”, “Tint”, “R-Level”, “G-Level” or “B-Level” adjustmentsMake the “Picture” or “Level” adjustments.

36

The colors are strange.

are not correct.

 

40

 

• The lamp life is ending.

Replace the lamp.

57

The remote control does not

• The remote control is not facing the remote sensor.

Face the remote control transmitter toward the remote

15

work.

 

sensor on the projector.

 

 

• The remote control is too far.

Operate within about 5 meters.

15

 

• There is an obstruction between the remote control and the

Remove the obstacle.

_

 

remote sensor.

 

 

 

• The batteries are exhausted.

Replace the batteries.

14

 

 

 

 

59

Others

Page 58 Page 60
Image 59
Page 58 Page 60
Contents TLP-B2ultra E Before use Safety PrecautionsImportant Precautions Important Safety Instructions Heat Important Safety InstructionsObject and Liquid Entry UseCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Names of each part on the main unit Foot adjusterSpeaker Exhaust holes AC in socket Control connector RS-232CBefore Names of each part on the remote controlPush back the holder Loading a batteryFront side Rear side Remote control operationTranslucent screen Viewer Floor-mounted projector placementSide view Determine the screen size projected on the screenTop view Push both sides of the lens cover to take off Connect the power cordTake off the lens cover Turn counterclockwise to lower Projector placement angle adjustmentHeight Turn clockwise to lift upTranslucent screen Ceiling-mounted projector placementCeiling-mounted front projection Ceiling-mounted rear projectionCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO CONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computerCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting video equipmentCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Projector operation control by a computerOperations Playback modeProjection on the screen Press ON/STANDBYSelect the input source On the remote control, press RGB or VideoProjection on the screen Turn to the right to enlarge the picture Focusing ringZooming ring Focus on the picture by turningPress ON/STANDBY again Turning the power offOff, unplug the power cord ProjectorKEY Press Keystone Correcting the keystone distortionPress Mute Cutting off the picture and sound temporarilyPress Freeze Freezing the picturePress Zoom + Enlarging the picture sizeUsed frequently AdjustmentsMenu screen structure Quick menuPress Enter Quick menu settingAdjust the item by pressing Press MenuScreen changes to the full menu screen Quick menu settingMenu screen disappears Display the full menu screen Adjusting picture Picture adjustmentSelect the setting item Contrast Pressing AdjustmentsIf you adjust other setting item, return to step Adjusting pictureAdjusting Image Image adjustment Clock To remove vertical stripes Adjusting imageMenu button will return to the previous setting screen Position To shift the image down -, to up +Level by pressing Adjusting RGB-level Level adjustmentEnter Adjusting RGB-levelSelect, Output select by pressing Adjusting audio output Audio adjustmentChannel select Adjusting audio outputAdjust the Volume by pressing Press Menu several times until the fullSetting screen for the item selected appears Setting the input signal Signal settingMode, No signal background, No signal Power off by pressing Then pressNo signal power off Picture modeVideo mode No signal backgroundSetting the input signal Screen display by pressing / and then Setting the display method Display settingSelect by pressing / and then press Enter Position, Menu background color, OnMenu background color Setting the display methodChange the selection by pressing Menu positionDefault setting Language Default settingProjection mode Power onMenu Display the current operation status Reset, Status display Data settingStatus display Keystone reset Reset, Status displayFactory reset mode Lamp turns off or does not light up MaintenanceOn indicator Trouble indicationsAttach the air filter cover Maintenance Air filter cleaningUnplug the power cord Take off the air filter cover Clean the air filter coverReplacing the intake, exhaust fans and air filter Lens and main unit cleaningCleaning the lens Cleaning the main unitPull out the lamp Lamp replacementUnplug the power cord Wait until the lamp gets cold enough Take off the lamp cover on the bottom panelAttach the lamp cover Maintenance Reset the lamp timerLoad a new lamp Others Before calling service personalPin arrangements Signal assignment for RGB inputTiming chart Applicable RGB signalInterface format Command list Controlling the projector by using RS-232CControlling the projector by using RS-232C Main unit SpecificationsAccessories

TLP-B2ultra specifications

The Toshiba TLP-B2ultra represents a significant advancement in the realm of high-performance projectors, targeting both professionals and casual users seeking exceptional visual experiences. Renowned for its impressive specifications, the TLP-B2ultra brings together cutting-edge technologies designed to deliver stunning image quality and versatility.

One of the standout features of the TLP-B2ultra is its remarkable brightness, achieved through the incorporation of advanced light source technology. With a high lumen output, this projector ensures images remain vivid and clear, even in well-lit environments. This capability makes it an excellent choice for corporate presentations, educational settings, and home cinema applications where lighting conditions can vary.

The projector supports a range of resolutions, including Full HD and even 4K, allowing users to experience crisp and detailed visuals. This versatility is further enhanced by its advanced color processing capabilities, ensuring that colors are reproduced accurately and vibrantly, which is essential for tasks such as graphic design, photography, and video editing.

Connectivity options are diverse, making the TLP-B2ultra compatible with an array of devices. It features HDMI ports, USB connections, and wireless options, which enable seamless integration with laptops, smartphones, and tablets. This extensive connectivity ensures that users can easily share their content with minimal hassle.

In terms of its design, the TLP-B2ultra boasts a compact and lightweight chassis, making it highly portable. This portability means that it can be easily transported for on-the-go presentations or set up in various rooms easily. Furthermore, its user-friendly interface simplifies operation, allowing quick adjustments to settings, ensuring users can focus on their content rather than technical difficulties.

Another significant characteristic of the TLP-B2ultra is its energy efficiency. Toshiba has integrated eco-friendly technologies that not only prolong the life of the lamp but also reduce overall power consumption. This focus on sustainability reflects a growing trend in the projector market toward environmentally conscious products.

In conclusion, the Toshiba TLP-B2ultra stands out as a versatile and powerful projector, perfect for various applications. Its high brightness, superior image quality, extensive connectivity, and eco-friendly design make it a compelling option for anyone looking to enhance their visual presentation experiences while maintaining ease of use and portability.
Top Page Image Contents