Toshiba TLP-B2ultra Lens and main unit cleaning, Cleaning the lens, Cleaning the main unit

Page 56

Lens and main unit cleaning

CONTENTS

CAUTION

If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning.

Cleaning the lens

Use a blower or a lens cleaner to clean the lens.

Never rub or tap the lens with a hard object as the lens surface is fragile.

Cleaning the main unit

•Pull out the power cord before cleaning.

•Use a soft cloth to wipe off stains from the

surface.

• To remove difficult stains, use a soft cloth slightly moistened with a weak solution of synthetic detergent and water, and finish with a soft, dry cloth.

Replacing the intake, exhaust fans and air filter

To maintain the efficiency of the projector, replace the intake and exhaust fans about every two to three years.

Ask the dealer for the replacement.

Maintenance

Image 56

Contents TLP-B2ultra E Safety Precautions Before useImportant Precautions Important Safety Instructions Important Safety Instructions HeatUse Object and Liquid EntryCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Foot adjuster Names of each part on the main unitControl connector RS-232C Speaker Exhaust holes AC in socketNames of each part on the remote control BeforeLoading a battery Push back the holderRemote control operation Front side Rear sideFloor-mounted projector placement Translucent screen ViewerSide view Determine the screen size projected on the screenTop view Push both sides of the lens cover to take off Connect the power cordTake off the lens cover Projector placement angle adjustment HeightTurn clockwise to lift up Turn counterclockwise to lowerCeiling-mounted projector placement Ceiling-mounted front projectionCeiling-mounted rear projection Translucent screenCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOConnecting video equipment CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOProjector operation control by a computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOPlayback mode Projection on the screenPress ON/STANDBY OperationsSelect the input source On the remote control, press RGB or VideoProjection on the screen Focusing ring Zooming ringFocus on the picture by turning Turn to the right to enlarge the pictureTurning the power off Off, unplug the power cordProjector Press ON/STANDBY againCorrecting the keystone distortion KEY Press KeystoneCutting off the picture and sound temporarily Press MuteFreezing the picture Press FreezeEnlarging the picture size Press Zoom +Adjustments Menu screen structureQuick menu Used frequentlyQuick menu setting Adjust the item by pressingPress Menu Press EnterScreen changes to the full menu screen Quick menu settingMenu screen disappears Adjusting picture Picture adjustment Select the setting item ContrastPressing Adjustments Display the full menu screenAdjusting picture If you adjust other setting item, return to stepAdjusting Image Image adjustment Adjusting image Menu button will return to the previous setting screenPosition To shift the image down -, to up + Clock To remove vertical stripesAdjusting RGB-level Level adjustment Level by pressingAdjusting RGB-level EnterAdjusting audio output Audio adjustment Select, Output select by pressingAdjusting audio output Adjust the Volume by pressingPress Menu several times until the full Channel selectSetting the input signal Signal setting Mode, No signal background, No signalPower off by pressing Then press Setting screen for the item selected appearsPicture mode Video modeNo signal background No signal power offSetting the input signal Setting the display method Display setting Select by pressing / and then press EnterPosition, Menu background color, On Screen display by pressing / and thenSetting the display method Change the selection by pressingMenu position Menu background colorDefault setting Default setting Projection modePower on LanguageMenu Display the current operation status Reset, Status display Data settingStatus display Keystone reset Reset, Status displayFactory reset mode Maintenance On indicatorTrouble indications Lamp turns off or does not light upAir filter cleaning Unplug the power cord Take off the air filter coverClean the air filter cover Attach the air filter cover MaintenanceLens and main unit cleaning Cleaning the lensCleaning the main unit Replacing the intake, exhaust fans and air filterLamp replacement Unplug the power cord Wait until the lamp gets cold enoughTake off the lamp cover on the bottom panel Pull out the lampAttach the lamp cover Maintenance Reset the lamp timerLoad a new lamp Before calling service personal OthersSignal assignment for RGB input Pin arrangementsApplicable RGB signal Timing chartControlling the projector by using RS-232C Interface format Command listControlling the projector by using RS-232C Specifications Main unitAccessories

TLP-B2ultra specifications

The Toshiba TLP-B2ultra represents a significant advancement in the realm of high-performance projectors, targeting both professionals and casual users seeking exceptional visual experiences. Renowned for its impressive specifications, the TLP-B2ultra brings together cutting-edge technologies designed to deliver stunning image quality and versatility.

One of the standout features of the TLP-B2ultra is its remarkable brightness, achieved through the incorporation of advanced light source technology. With a high lumen output, this projector ensures images remain vivid and clear, even in well-lit environments. This capability makes it an excellent choice for corporate presentations, educational settings, and home cinema applications where lighting conditions can vary.

The projector supports a range of resolutions, including Full HD and even 4K, allowing users to experience crisp and detailed visuals. This versatility is further enhanced by its advanced color processing capabilities, ensuring that colors are reproduced accurately and vibrantly, which is essential for tasks such as graphic design, photography, and video editing.

Connectivity options are diverse, making the TLP-B2ultra compatible with an array of devices. It features HDMI ports, USB connections, and wireless options, which enable seamless integration with laptops, smartphones, and tablets. This extensive connectivity ensures that users can easily share their content with minimal hassle.

In terms of its design, the TLP-B2ultra boasts a compact and lightweight chassis, making it highly portable. This portability means that it can be easily transported for on-the-go presentations or set up in various rooms easily. Furthermore, its user-friendly interface simplifies operation, allowing quick adjustments to settings, ensuring users can focus on their content rather than technical difficulties.

Another significant characteristic of the TLP-B2ultra is its energy efficiency. Toshiba has integrated eco-friendly technologies that not only prolong the life of the lamp but also reduce overall power consumption. This focus on sustainability reflects a growing trend in the projector market toward environmentally conscious products.

In conclusion, the Toshiba TLP-B2ultra stands out as a versatile and powerful projector, perfect for various applications. Its high brightness, superior image quality, extensive connectivity, and eco-friendly design make it a compelling option for anyone looking to enhance their visual presentation experiences while maintaining ease of use and portability.