Toshiba TLP-B2ultra owner manual Connect the power cord, Take off the lens cover

Page 18

 

Floor-mounted projector placement (Continued)

 

 

 

 

CONTENTS

 

 

 

 

 

 

3

Connect the power cord.

 

 

 

• Insert one end in the AC IN socket on the projector.

Control panel on the main unit

 

 

 

• Insert the other end in a wall outlet.

 

Light

Light (Orange)

The ON indicator lights in orange and the projector turns to standby mode. The mark of ON/STANDBY on the main unit will also light.

4 Take off the lens cover.

Push both sides of the lens cover to take off.

18

connectionInstallation and

Notes

•Select a room that can be darkened.

•When the projector is moved from a cold location to a warm location, or when the ambient temperature in the projection room has risen suddenly, moisture may condense on the lens or the mirror to blur the projected pictures. In such a case, leave the projector for an adequate time (1 to 2 hours, depending on the room’s condition) before using it so it adjusts to the ambient temperature.

•If the screen is exposed to direct sunlight or other strong light, the projected picture becomes too faint to see. Shut out the light with curtains or other means.

•If the screen and the projector are not installed properly, the projected picture may be distorted.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents TLP-B2ultra E Safety Precautions Before useImportant Precautions Important Safety Instructions Important Safety Instructions HeatUse Object and Liquid EntryCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Foot adjuster Names of each part on the main unitControl connector RS-232C Speaker Exhaust holes AC in socketNames of each part on the remote control BeforeLoading a battery Push back the holderRemote control operation Front side Rear sideFloor-mounted projector placement Translucent screen ViewerDetermine the screen size projected on the screen Top viewSide view Connect the power cord Take off the lens coverPush both sides of the lens cover to take off Turn clockwise to lift up Projector placement angle adjustmentHeight Turn counterclockwise to lowerCeiling-mounted rear projection Ceiling-mounted projector placementCeiling-mounted front projection Translucent screenCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOConnecting video equipment CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOProjector operation control by a computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOPress ON/STANDBY Playback modeProjection on the screen OperationsOn the remote control, press RGB or Video Projection on the screenSelect the input source Focus on the picture by turning Focusing ringZooming ring Turn to the right to enlarge the pictureProjector Turning the power offOff, unplug the power cord Press ON/STANDBY againCorrecting the keystone distortion KEY Press KeystoneCutting off the picture and sound temporarily Press MuteFreezing the picture Press FreezeEnlarging the picture size Press Zoom +Quick menu AdjustmentsMenu screen structure Used frequentlyPress Menu Quick menu settingAdjust the item by pressing Press EnterQuick menu setting Menu screen disappearsScreen changes to the full menu screen Pressing Adjustments Adjusting picture Picture adjustmentSelect the setting item Contrast Display the full menu screenAdjusting picture If you adjust other setting item, return to stepAdjusting Image Image adjustment Position To shift the image down -, to up + Adjusting imageMenu button will return to the previous setting screen Clock To remove vertical stripesAdjusting RGB-level Level adjustment Level by pressingAdjusting RGB-level EnterAdjusting audio output Audio adjustment Select, Output select by pressingPress Menu several times until the full Adjusting audio outputAdjust the Volume by pressing Channel selectPower off by pressing Then press Setting the input signal Signal settingMode, No signal background, No signal Setting screen for the item selected appearsNo signal background Picture modeVideo mode No signal power offSetting the input signal Position, Menu background color, On Setting the display method Display settingSelect by pressing / and then press Enter Screen display by pressing / and thenMenu position Setting the display methodChange the selection by pressing Menu background colorDefault setting Power on Default settingProjection mode LanguageMenu Reset, Status display Data setting Status displayDisplay the current operation status Reset, Status display Factory reset modeKeystone reset Trouble indications MaintenanceOn indicator Lamp turns off or does not light upClean the air filter cover Air filter cleaningUnplug the power cord Take off the air filter cover Attach the air filter cover MaintenanceCleaning the main unit Lens and main unit cleaningCleaning the lens Replacing the intake, exhaust fans and air filterTake off the lamp cover on the bottom panel Lamp replacementUnplug the power cord Wait until the lamp gets cold enough Pull out the lampMaintenance Reset the lamp timer Load a new lampAttach the lamp cover Before calling service personal OthersSignal assignment for RGB input Pin arrangementsApplicable RGB signal Timing chartControlling the projector by using RS-232C Interface format Command listControlling the projector by using RS-232C Specifications Main unitAccessories

TLP-B2ultra specifications

The Toshiba TLP-B2ultra represents a significant advancement in the realm of high-performance projectors, targeting both professionals and casual users seeking exceptional visual experiences. Renowned for its impressive specifications, the TLP-B2ultra brings together cutting-edge technologies designed to deliver stunning image quality and versatility.

One of the standout features of the TLP-B2ultra is its remarkable brightness, achieved through the incorporation of advanced light source technology. With a high lumen output, this projector ensures images remain vivid and clear, even in well-lit environments. This capability makes it an excellent choice for corporate presentations, educational settings, and home cinema applications where lighting conditions can vary.

The projector supports a range of resolutions, including Full HD and even 4K, allowing users to experience crisp and detailed visuals. This versatility is further enhanced by its advanced color processing capabilities, ensuring that colors are reproduced accurately and vibrantly, which is essential for tasks such as graphic design, photography, and video editing.

Connectivity options are diverse, making the TLP-B2ultra compatible with an array of devices. It features HDMI ports, USB connections, and wireless options, which enable seamless integration with laptops, smartphones, and tablets. This extensive connectivity ensures that users can easily share their content with minimal hassle.

In terms of its design, the TLP-B2ultra boasts a compact and lightweight chassis, making it highly portable. This portability means that it can be easily transported for on-the-go presentations or set up in various rooms easily. Furthermore, its user-friendly interface simplifies operation, allowing quick adjustments to settings, ensuring users can focus on their content rather than technical difficulties.

Another significant characteristic of the TLP-B2ultra is its energy efficiency. Toshiba has integrated eco-friendly technologies that not only prolong the life of the lamp but also reduce overall power consumption. This focus on sustainability reflects a growing trend in the projector market toward environmentally conscious products.

In conclusion, the Toshiba TLP-B2ultra stands out as a versatile and powerful projector, perfect for various applications. Its high brightness, superior image quality, extensive connectivity, and eco-friendly design make it a compelling option for anyone looking to enhance their visual presentation experiences while maintaining ease of use and portability.
Top Page Image Contents