Magnepan MG3.6/R manual Version 2 Ribbon Tweeter Replacement

Page 13

16.60" VERSION 2 RIBBON TWEETER REPLACEMENT

Tools Needed:

#2 Phillips Screwdriver

 

Needle Nose Pliers

1. Place protective cover over backside of ribbon tweeter, as shown (to prevent damage to ribbon while moving the speaker panel).

2. Carefully lay speaker on a flat table or working surface.

3. Remove the protective cover and pry away the two end covers.

4. Pull off the connector at each end of the ribbon tweeter with a pair of needle nose pliers.

5. Reinstall protective cover over ribbon.

6. Remove the screws that attach the ribbon tweeter to the frame and then remove the tweeter.

7. Install the new ribbon tweeter in the frame. Serial number label must be at the bottom.

8. Insert the screws. (Tighten until snug, then back off ½ revolution.)

9. Remove protective cover and reattach connectors to the ribbon lugs.

10. Peel liner from back of end covers and adhere to each end of tweeter.

11. Install protective cover.

12. Reposition speakers in listening position and remove protective cover.

13. Pack old tweeter(s) in the tube and packing provided and return to your dealer or Magnepan.

CAUTION: Do not bump of touch the ribbon at its end terminals. Also do not tug on the fine wire jumper that is soldered to the foil and attached to the end terminal. All ribbon tweeters returned to the factory MUST be returned in the factory packing.

Image 13
Contents Magneplanar MG3.6/R Important Precautions Accessory Carton ContentsIntroduction General DescriptionPackaging Speaker Unpacking and AssemblyHookup DIRECT-CONNECT Crossover InstallationPage Tweeter Placement Speaker PlacementPage Stereo Width and Imaging Optional Ribbon Tweeter Attenuation Room AcousticsBI-AMPLIFICATION with Conventional Electronic Crossover Maintenance BI-WIRING OptionService Ribbon Tweeter Version 2 Ribbon Tweeter Replacement Crossover 17. MG3.6/R Specifications

MG3.6/R specifications

The Magnepan MG3.6/R is a remarkable loudspeaker that has earned a dedicated following among audiophiles and music enthusiasts since its introduction. Renowned for its unique design and exceptional sound quality, the MG3.6/R embodies the innovative spirit of Magnepan, a company that has specialized in planar magnetic speaker technology for decades.

One of the main features of the MG3.6/R is its innovative planar magnetic design. Unlike conventional dynamic speakers that use a cone or a dome to create sound, the MG3.6/R employs a flat diaphragm suspended between powerful magnets. This design allows for a more uniform sound radiation pattern and minimizes distortion, resulting in clear and accurate audio reproduction. The consistency of sound across a wide frequency range is a hallmark of planar magnetic technology, and the MG3.6/R exemplifies this in its sonic performance.

The MG3.6/R is particularly noted for its impressive midrange and high-frequency performance. Many users report that vocals and acoustic instruments sound exceptionally natural and detailed. This is largely due to the speaker's ability to reproduce transient responses with remarkable accuracy. The magnesium-coated film used in the diaphragm contributes to a controlled response, enabling the MG3.6/R to deliver an engaging listening experience that draws listeners into the music.

Another defining characteristic of the MG3.6/R is its size and design. At 6 feet tall, this speaker not only looks striking but also takes full advantage of its height to create a larger-than-life soundstage. The tall, narrow profile allows it to project sound effectively across a wide area, making it ideal for a range of room sizes. Additionally, the speakers are designed to be used as dipole radiators, meaning they emit sound from both the front and back. This results in a more immersive listening experience and enhances spatial imaging.

The MG3.6/R also incorporates advanced technologies such as a fully integrated crossover network, which facilitates seamless blending between the speaker’s low and high-frequency drivers. This ensures a coherent sound that faithfully reproduces the original recording’s intent. Furthermore, the MG3.6/R’s robust construction, featuring a sturdy frame and quality materials, allows it to withstand ongoing use without compromising performance.

Overall, the Magnepan MG3.6/R stands out not only for its audio fidelity but also for its unique engineering and aesthetic design. It is a speaker that caters to discerning listeners who appreciate high-quality sound in an elegant package, making it a popular choice among audiophiles worldwide. With its combination of innovative technology and exceptional sound quality, the MG3.6/R remains a staple in the world of high-performance audio.