Magnepan MG3.6/R manual Hookup, DIRECT-CONNECT Crossover Installation

Page 4

7.HOOKUP

This section covers amplification with a single stereo amplifier. For instruction on bi- amplification or bi-wiring, refer to Sections 11 and 12.

DIRECT-CONNECT CROSSOVER INSTALLATION

A.Insert the small connectors in the four output ports of the crossover box, using a 5/64" hex wrench. See Figure 2, Page 4.

B.Screw the support bracket to the bottom of the crossover box with the 3/8" long screw provided. DO NOT OVER TIGHTEN!

C.Insert and secure the crossover box to the respective connector holes in the nameplate, using a 5/64" hex wrench.

D.Locate the lower mounting hole on the speaker panel 5/8" up from the bottom of the panel, and located on the center line of the nameplate (as shown). Hand- insert the 3/4" long machine screw. CAUTION: Do not cross thread the screw. Tighten with a Phillips head screwdriver.

The MG3.6/R features high-current cable connectors which provide optimum contact area with speaker cables up to 10 gauge. To prepare cables, strip 1/2" of insulation from the end of the cable. Insert the bare wire into the connector and tighten the set- screw with the Alien wrench provided. Take special precautions to ensure correct polarity on all speaker cable connections. Most speaker cables have some sort of coding on one lead, either printing, colors, or a "rib" to help in maintaining polarity.

Spade lug adapters are available from your Magneplanar dealer for speaker cables that are incompatible with the Magneplanar high-current connector.

Image 4
Contents Magneplanar MG3.6/R Accessory Carton Contents Important PrecautionsIntroduction General DescriptionSpeaker Unpacking and Assembly PackagingDIRECT-CONNECT Crossover Installation HookupPage Speaker Placement Tweeter PlacementPage Stereo Width and Imaging Room Acoustics Optional Ribbon Tweeter AttenuationBI-AMPLIFICATION with Conventional Electronic Crossover Maintenance BI-WIRING OptionService Ribbon Tweeter Version 2 Ribbon Tweeter Replacement 17. MG3.6/R Specifications Crossover

MG3.6/R specifications

The Magnepan MG3.6/R is a remarkable loudspeaker that has earned a dedicated following among audiophiles and music enthusiasts since its introduction. Renowned for its unique design and exceptional sound quality, the MG3.6/R embodies the innovative spirit of Magnepan, a company that has specialized in planar magnetic speaker technology for decades.

One of the main features of the MG3.6/R is its innovative planar magnetic design. Unlike conventional dynamic speakers that use a cone or a dome to create sound, the MG3.6/R employs a flat diaphragm suspended between powerful magnets. This design allows for a more uniform sound radiation pattern and minimizes distortion, resulting in clear and accurate audio reproduction. The consistency of sound across a wide frequency range is a hallmark of planar magnetic technology, and the MG3.6/R exemplifies this in its sonic performance.

The MG3.6/R is particularly noted for its impressive midrange and high-frequency performance. Many users report that vocals and acoustic instruments sound exceptionally natural and detailed. This is largely due to the speaker's ability to reproduce transient responses with remarkable accuracy. The magnesium-coated film used in the diaphragm contributes to a controlled response, enabling the MG3.6/R to deliver an engaging listening experience that draws listeners into the music.

Another defining characteristic of the MG3.6/R is its size and design. At 6 feet tall, this speaker not only looks striking but also takes full advantage of its height to create a larger-than-life soundstage. The tall, narrow profile allows it to project sound effectively across a wide area, making it ideal for a range of room sizes. Additionally, the speakers are designed to be used as dipole radiators, meaning they emit sound from both the front and back. This results in a more immersive listening experience and enhances spatial imaging.

The MG3.6/R also incorporates advanced technologies such as a fully integrated crossover network, which facilitates seamless blending between the speaker’s low and high-frequency drivers. This ensures a coherent sound that faithfully reproduces the original recording’s intent. Furthermore, the MG3.6/R’s robust construction, featuring a sturdy frame and quality materials, allows it to withstand ongoing use without compromising performance.

Overall, the Magnepan MG3.6/R stands out not only for its audio fidelity but also for its unique engineering and aesthetic design. It is a speaker that caters to discerning listeners who appreciate high-quality sound in an elegant package, making it a popular choice among audiophiles worldwide. With its combination of innovative technology and exceptional sound quality, the MG3.6/R remains a staple in the world of high-performance audio.