Speaker Placement, Tweeter Placement | Magnepan MG3.6/R instruction

FUSING – The mid and treble sections of the MG3.6/R are protected with Type SAG normal blow fuses (4 amp for midrange; 2-1/2 amp for tweeter). The bass section does not require fusing protection. The fuse values should never be increased or bypassed. Do not use slow-blow fuses. Fuses remain in effect when bi-amplifying. This is done for your protection since it prevents overdriving from an amplifier, or the distortion that results from an overdriven amplifier (clipping).

In case the MG3.6's do not sound "quite right," especially after high volume levels, please check the midrange fuse. When it is blown some owners do not realize it, since a blown midrange fuse is not as apparent as a blown tweeter fuse. Some amplifiers will distort or go into thermal overload when driving MG3.6's with a blown midrange fuse.

BURNED OUT MID OR TREBLE SECTIONS ARE NOT COVERED

UNDER THE WARRANTY.

8.SPEAKER PLACEMENT

Proper speaker placement and room acoustics can have more effect on a music system than upgrading one of the components in the system. Unfortunately, there is no definitive guideline which will cover all possible listening rooms. Considerable experimentation is required for locating the optimum position. The following are a few general guidelines:

TWEETER PLACEMENT

The MG3.6 tweeters are mirror-imaged. For proper phasing between the bass, midrange, and tweeter, the bass driver should be closer to the listener than the tweeter (ahead in time). If the tweeters are placed on the outside, the angle of the speaker in relation to the listener should be as shown in Figure 3. If the tweeters are placed on the inside, the speaker angle should be as shown in Figure 4.

BASS RESPONSE

If you do not have access to a spectrum analyzer, play a record with a repetitive bass line (preferably an acoustical bass instrument). Try the speakers in several parts of the room. Start experimenting with the speakers about 3 feet from the back wall. Try moving the speakers forward or backward by increments of 6 to 12 inches at a time. One part of the room should be noticeably better than the rest, as should one distance from the rear wall as shown in Figure 5.

MG3.6/R specifications

The Magnepan MG3.6/R is a remarkable loudspeaker that has earned a dedicated following among audiophiles and music enthusiasts since its introduction. Renowned for its unique design and exceptional sound quality, the MG3.6/R embodies the innovative spirit of Magnepan, a company that has specialized in planar magnetic speaker technology for decades.

One of the main features of the MG3.6/R is its innovative planar magnetic design. Unlike conventional dynamic speakers that use a cone or a dome to create sound, the MG3.6/R employs a flat diaphragm suspended between powerful magnets. This design allows for a more uniform sound radiation pattern and minimizes distortion, resulting in clear and accurate audio reproduction. The consistency of sound across a wide frequency range is a hallmark of planar magnetic technology, and the MG3.6/R exemplifies this in its sonic performance.

The MG3.6/R is particularly noted for its impressive midrange and high-frequency performance. Many users report that vocals and acoustic instruments sound exceptionally natural and detailed. This is largely due to the speaker's ability to reproduce transient responses with remarkable accuracy. The magnesium-coated film used in the diaphragm contributes to a controlled response, enabling the MG3.6/R to deliver an engaging listening experience that draws listeners into the music.

Another defining characteristic of the MG3.6/R is its size and design. At 6 feet tall, this speaker not only looks striking but also takes full advantage of its height to create a larger-than-life soundstage. The tall, narrow profile allows it to project sound effectively across a wide area, making it ideal for a range of room sizes. Additionally, the speakers are designed to be used as dipole radiators, meaning they emit sound from both the front and back. This results in a more immersive listening experience and enhances spatial imaging.

The MG3.6/R also incorporates advanced technologies such as a fully integrated crossover network, which facilitates seamless blending between the speaker’s low and high-frequency drivers. This ensures a coherent sound that faithfully reproduces the original recording’s intent. Furthermore, the MG3.6/R’s robust construction, featuring a sturdy frame and quality materials, allows it to withstand ongoing use without compromising performance.

Overall, the Magnepan MG3.6/R stands out not only for its audio fidelity but also for its unique engineering and aesthetic design. It is a speaker that caters to discerning listeners who appreciate high-quality sound in an elegant package, making it a popular choice among audiophiles worldwide. With its combination of innovative technology and exceptional sound quality, the MG3.6/R remains a staple in the world of high-performance audio.