3.Cable connection
No. | Connector | Descriptions | |
|
|
| |
|
| For Ethernet connection. Connects this port to the LAN port | |
1 | of Ethernet switch via supplied coupler. | ||
| |||
Supporting PoE+, this port can connect to the PoE+ switch | |||
|
| ||
|
| or PoE+ injector. | |
|
|
| |
| 24V AC Power | Connect the power terminals to a 24V AC power supply and | |
2 | Input(Black/White) and | ||
ground the green wire. | |||
| Ground(Green) | ||
|
| ||
|
|
| |
3 | Reset (Orange/White) | Using a pointed object, short both terminals to restart the | |
camera. | |||
|
| ||
|
|
| |
4 | Audio In (Black/White) | Connect to an external microphone to this terminal. | |
(White: signal, Black:GND) | |||
|
| ||
|
|
| |
| Alarm Out Open (Light Green) | Connect to device that responds to alarm signals. “Com” and | |
5 | Alarm Out Com (Black) | “Close” terminals are switched ON normally, and “Com” and | |
|
| “Open” terminals are switched ON when Alarm is triggered. | |
| Alarm Out Close (Purple) | ||
|
|
|
17