3.2Optional connection such as alarm in/out devices to the camera.
Network Deployment
1. Connect the Camera to the Network
Using an Ethernet cable (not supplied), connect one end to the RJ45 connector of the camera and the other end to the LAN port of the network switch via supplied RJ45 coupler. And connect your client PC to this network switch.
2. Install “IP Camera Finder” on your client PC
To make the camera accessible to your network, you must configure appropriate network settings for the camera. To do so, you may install the provided IP Camera Finder on your computer for initial setup purpose.
1.Insert the provided
2.
3.Follow the prompts to finish installing.
4.The program automatically creates a shortcut icon on your desktop after it’s successfully installed.
5.Start “IP Camera Finder” to Configure the Camera
19