Toshiba B-SV4T-GS10-QM owner manual Appendix 2 Interface, Interface Cables

Page 29

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION

APPENDIX2 INTERFACE

APPENDIX 2 INTERFACE

Interface Cables

To prevent radiation and reception of electrical noise, the interface cables must meet the following requirements:

•Fully shielded and fitted with metal or metallized connector housings.

•Keep as short as possible.

•Should not be bundled tightly with power cords.

•Should not be tied to power line conduits.

RS-232C Cable description

The serial data cable used to connect the printer to a host computer should be one of the following two types (9-pin or 25-pin connector):

Connector to the Host Computer

Function	9 pin	25 pin

RXD	2	3
TXD	3	2
DTR	4	20
GND	5	7
DSR	6	6
RTS	7	4
C TS	8	5

Connector to Printer

Pin No.	Function
1	+5V
2	TXD
3	RXD
4	RTS
5	GND
6	CTS
7	RTS
8	CTS
9	+5V

NOTE:

Use an RS-232C cable with a connector with inch type securing screws.

EA2-1

Image 29

Contents SV4T-GS10-QM CE Compliance for EU only Iii Precautions Table of Contents Product Overview When purchasing the power cord Rear View DimensionsFront View Interior Button and Indicator LampPrecautions Printer SetupON/OFF Turning OFF the Printer Connecting the Cables to the PrinterConnecting the Power Adapter and the Power Cord Loading the Media Media Guide Loading the Media External Media Roll Hanger Option Loading the Ribbon Media Sensor Print test label sample Print Head MaintenanceCleaning Cover Platen/SensorsCare/Handling of the Media Removing Jammed Media TroubleshootingTroubleshooting Guide A1.1 Printer Appendix 1 SpecificationsA1.3.1 Media Type A1.2 OptionsA1.3 Media A1.3.3 Detection Area of the Reflective Sensor A1.3.2 Detection Area of the Transmissive SensorA1.3.4 Effective Print Area A1.4 RibbonInterface Cables Appendix 2 InterfaceGlossaries