Toshiba R100 manual Tests and Diagnostics Wireless LAN Test Atheros, Setting the responder machine

Page 126

3 Tests and Diagnostics

3.14 Wireless LAN Test (Atheros)

Setting the responder machine

NOTE: Release the write-protection of the floppy disk for the test.

Insert a floppy disk containing the test program into the FDD for the responder machine and turn on the responder machine. The Wireless LAN test menu will appear.

###############################################################

#### Atheros WLAN sub system repair test VX.XX ####

###############################################################

*

1

.....Test PC [Initiator]

*

*

*

*

0

.....[Responder]

*

*

*

*

 

 

*

***************************************************************

....Press test number [1,0] ?

Press 0 and Enter in the responder machine. After a while, the following messages will appear. The latter message is updated ever 3 seconds.

Waiting for transmitter to ring the bell in 11a mode.

Input or output error (EIO) : rxDatBegin : nothing receive within 3000millisecs(waitTime)

The responder machine is ready for the test.

Setting the tester machine

NOTE: Release the write-protection of the floppy disk for the test.

Insert a floppy disk containing the test program into the FDD of the tester machine and turn on the tester machine. The Wireless LAN test menu will appear.

###############################################################

#### Atheros WLAN sub system repair test VX.XX ####

###############################################################

*

1

.....Test PC [Initiator]

*

*

*

*

0

.....[Responder]

*

*

*

*

 

 

*

***************************************************************

....Press test number [1,0] ?

Press 1 and Enter in the tester machine. After a while, the following message will appear:

--------------------------------------------

-

mac address check OK !!

-

-

-

-

...Press any key !!

-

-

-

-

 

-

--------------------------------------------

To proceed the test, press any key.

3-36

PORTEGE R100 Maintenance Manual (960-440)

Image 126
Contents Portege R100 File NumberCopyright Safety Precautions PrefacePortege R100 Maintenance Manual Conventions AcronymsTable of Contents Chapter Tests and Diagnostics Chapter Replacement ProceduresHDD AppendicesHardware Overview Hardware Overview Chapter Contents Figures TablesFeatures USB FDDHardware Overview Features Features Hardware Overview Front of the computer Shows the system block diagram Hardware Overview Features Features Hardware Overview Hardware Overview Features 1.8-inch HDD 1.8-inch HDD dimensions 1.8-inch Hard Disk DriveSpecification Parameter Keyboard LCD module specifications 12.1 TFT TFT Color DisplayLCD Module FL inverter board specifications FL Inverter BoardPower Supply Power supply output specificationsPower Supply Hardware Overview Battery specifications Main BatteryBatteries RTC Battery Battery Charging ControlTime required for charges of main battery RTC battery charging/data preservation timeAC adapter specifications AC AdapterChapter Troubleshooting Procedures Troubleshooting Procedures Power Status Check LAN Figures Troubleshooting Procedures Troubleshooting Troubleshooting Flowchart Troubleshooting Troubleshooting flowchart 1/2Troubleshooting flowchart 2/2 Troubleshooting Flowchart Power Supply Troubleshooting Procedure 1 Power supply icon Check Battery iconDC in icon Troubleshooting Power Supply Troubleshooting Procedure 2 Error Code Check Error code MeaningSecond Battery PPV output Troubleshooting Power Supply Troubleshooting 1R2-P1V outputPower Supply Troubleshooting Procedure 3 Connection Check Procedure 4 Quick Charge CheckProcedure 5 Replacement Check System board Troubleshooting Procedure 1 Message Check KBC Error HDC Error Procedure 2 Debug Port Check on Boot Mode A set of tool for debug port testTroubleshooting System board Troubleshooting System board Troubleshooting D port status 1/6 Port Inspection items Details StatusF009h System board Troubleshooting D port status 3/6 Port status Inspection items DetailsPciconfiguration D port status 4/6System board Troubleshooting D port status 5/6 LCDError code Contents D port status 6/6Procedure 3 Diagnostic Test Program Execution Check Procedure 4 Replacement CheckUSB 3.5 FDD Troubleshooting Procedure 1 FDD Head Cleaning CheckProcedure 2 Diagnostic Test Program Execution Check FDD error code and statusProcedure 3 Connector Check and Replacement Check 1.8 HDD Troubleshooting 1.8 HDD TroubleshootingProcedure 1 Partition Check Procedure 2 Message Check Procedure 3 Format Check Procedure 4 Diagnostic Test Program Execution Check 1.8 HDD error code and statusProcedure 5 Connector Check and Replacement Check Keyboard Troubleshooting Procedure 1 Diagnostic Test Program Execution CheckProcedure 2 Connector Check and Replacement Check Procedure 2 Connector and Cable Check Display TroubleshootingDisplay Troubleshooting Procedure 3 Fuse Conduction checkTroubleshooting Display Troubleshooting Procedure 3 Replacement Check Touch Pad TroubleshootingProcedure 2 Connector checking and replacement checking Touch PadModem HD board 11 LAN PJ352 Procedure 2 Connector Check SoundProcedure 3 Replacement Check Procedure 1 Check on Windows Procedure 2 Connector/Replacement CheckSD card slot Wireless LAN Troubleshooting Wireless LAN TroubleshootingProcedure 1 Transmitting-Receiving Check Procedure 2 Antennas Connection Check Procedure 3 Antenna Check Antenna Test jigProcedure 4 Replacement Check Chapter Tests and Diagnostics Tests and Diagnostics 20.1 19.119.2 20.224.1 Function Description Accessing the Setup Program Diagnostic Test Tests and Diagnostics Diagnostic Test Executing the Diagnostic Test Tests and Diagnostics Executing the Diagnostic Test Test Name Tests and Diagnostics3.2 Executing the Diagnostic Test Subtest Test Name Subtest No Subtest NameSubtest Subtest names 2/2System Test System Test CPU Temp = XX deg C Throttling level = XXXXh Memory Test Memory TestMemory Test Keyboard Test Keyboard TestKeyboard Test Test port number select 1Port0, 2Port1 ? Display Test Display example Mode Display TestDisplay TestDisplay Test Tests and Diagnostics USB Floppy Disk Test USB Floppy Disk TestPortege R100 Maintenance Manual Hard Disk Test Hard Disk TestHard Disk Test Tests and Diagnostics Worst pattern data Cylinder Real Timer Test Real Timer TestReal Timer Test Tests and DiagnosticsReal Timer Test NDP Test Sub# Address Good Bad Contents Expansion TestExpansion TestExpansion Test Wireless LAN Test Agere Tests and Diagnostics Wireless LAN Test AgereWireless LAN Test Agere Tests and Diagnostics Transmit testReceive test Wireless LAN Test Agere3 Tests and Diagnostics This Card is WEP Press any key to continue Wireless LAN Test Atheros Wireless LAN Test Atheros Tests and DiagnosticsTests and Diagnostics Wireless LAN Test Atheros Setting the responder machineSetting the tester machine Then the test returns to the main menu automatically Wireless LAN Test Calexico Tests and Diagnostics Wireless LAN Test CalexicoSetting the target machine Sound/LAN/Modem Test Appears Press test number 1-4 ? Error Status Code Error status codes names 1/2Error status codes names 2/2 HDDHard disk controller status register contents HDC StatusTests and Diagnostics Error register contents FDD Cleaning Function DescriptionOperations Log Utilities CNT Errors STS Addr WD RD Hsts Running Test Mount the work disks on the drives, then press Enter key Floppy Disk Drive Utilities Tests and Diagnostics Floppy Disk Drive UtilitiesTests and Diagnostics Floppy Disk Drive Utilities Floppy Disk Format & Copy Select a format type and the following message will appear Press number key 1up, 2down, 3end ? Press Enter to return to the FDD Utilities Menu System Configuration System Configuration Tests and DiagnosticsTests and Diagnostics System Configuration Setup Accessing the Setup Program Factory Preset Configuration Moving Within the Setup Menu and Changing ValuesAccepting Changes and Exiting the Setup Window HDD mode Password Write PolicySetup Options Full PowerSetup Using the AC adapter LowMaximum Performance User password has been registered Built-in HDD →PC card Dynamically Switchable Indicates auto power on and Wake-up on LAN is not set Drives I/O Enhanced IDE Normal Disables Legacy support Setup Tests and Diagnostics Chapter Replacement Procedures Replacement Procedures Grip Color Screw Notation Replacement Procedures Removing the battery pack 40 to 4-51 Replacing Toshiba fluorescent lamp 1 to Overview Removing the touch padSafety Precautions Before You Begin Disassembly Procedures Assembly Procedure Tools and EquipmentScrew Tightening Torque Grip ColorScrew Notation Battery pack Removing the battery packInstalling the battery pack Installing the PC card PC card/SD memory cardPC card Removing the PC card Installing the SD memory card SD memory card Removing the SD memory cardMemory module Removing the memory moduleInstalling the memory module Removing the memory moduleHDD Removing the HDDHDD Replacement Procedures Installing the HDD Keyboard/Bottom cover Keyboard Removing the keyboardInstalling the keyboard 10 Removing the keyboard holderBottom cover Removing the bottom cover 11 Removing the bottom cover112 Removing the bottom cover2 Installing the bottom cover Installing a touch pad Removing the Touch padInstalling the MDC board MDC board/HDD cableMDC board Removing the MDC board Installing the HDD cable HDD cable Removing the HDD cableSpeaker/ RTC battery Speaker Removing the speakerInstalling the speaker RTC battery Removing the RTC battery Installing the RTC batteryWireless LAN board Removing the wireless LAN boardWireless LAN board Replacement Procedures Installing the wireless LAN board PC card slot PC card slot4 Replacement ProceduresInstalling the PC card slot Removing the PC card slotInstalling the LAN/MODEM jack 12 LAN/MODEM jackRemoving the LAN/MODEM jack Installing the sound board Sound boardRemoving the sound board System board/ FAN System board Removing the system boardInstalling the system board 26 Removing the system board14.2 FAN Removing the FAN 27 Removing the FANInstalling the FAN 28 Applying silicon greaseLED SW membrane Replacement Procedures LED SW membraneInstalling the LED SW membrane Removing the LED SW membraneLCD mask/FL inverter/LCD Replacement Procedures LCD mask/FL inverter/LCDLCD mask Removing the LCD mask Replacement Procedures LCD mask/FL inverter/LCD Installing the LCD maskInstalling the FL inverter FL inverter Removing the FL inverterInstalling the LCD 16.3 LCD Removing the LCDLCD cable/Wireless LAN cable/Antenna cover LCD cable Removing the LCD cableInstalling the LCD cable 34 Removing the LCD cable35 Removing the Wireless LAN cable holder 36 Removing the Wireless LAN cable holder Installing the Wireless LAN cable Hinge Removing the palm lest cover hingeInstalling the palmrest cover hinge M2.5⋅5Z Thin Head screw M2.5x3SCFluorescent Lamp Replacing the 12.1 Inch Toshiba Matsushita Fluorescent Lamp 40 Replacing Toshiba fluorescent lamp141 Replacing Toshiba fluorescent lamp2 42 Replacing Toshiba fluorescent lamp4 43 Replacing Toshiba fluorescent lamp5 44 Replacing Toshiba fluorescent lamp6 45 Replacing Toshiba fluorescent lamp7 46 Replacing Toshiba fluorescent lamp8 Be careful not to damage the cell, TAB and P/L 47 Replacing Toshiba fluorescent lamp9Use a Philips screwdriver with type 0 bit 48 Replacing Toshiba fluorescent lamp10Appendices Appendices Appendix Contents Appendix D Keyboard Scan/Character Codes Appendix E Figure B-1 FL Inverter connector 7pin CRT I/F connector 15pin ME Board Table C-25 HD Board Table C-23Table C-24 MI Board Table C-26App-viii Precautions for handling the LCD module Apx. a Handling the LCD Module AppendicesAppendices Apx. a Handling the LCD Module Apx. a Handling the LCD Module Appendices Appendices Apx. a Handling the LCD Module Apx. a Handling the LCD Module Appendices Appendices Apx. a Handling the LCD Module System board Front View Apx. B Board Layout AppendicesAppendices Apx. B Board Layout Table B-1 System board front Mark Number NameSystem board Back View Figure B-2 System board layout BackAppendices Apx. B Board Layout Table B-2 System board back ICH4-MMI Board Front and Back View Table B-3 Antenna boardSC Board Front and Back View Appendices Apx. B Board LayoutTable C-1 LCD connector 15pin System Board PJ5600 LCD connector 15pinPJ5601 FL Inverter connector 7pin Table C-2 FL Inverter connector 7pinPJ5620 CRT I/F connector 15pin PJ4 USB1 connector 4pinPJ5 USB2 connector 4pin Table C-6 Debug port connector 4pin PJ325 Debug port connector 4pinPJ11 PC Card Slot connector 80pin Table C-7 PC Card Slot connector 80pin 1/2Table C-7 PC Card Slot connector 80pin 2/2 Table C-8 SD Card I/F connector 12pin PJ2210 SD Card connector 12pinPJ7 LED SW connector 13pin Table C-9 LED SW connector 13pinTable C-10 Keyboard connector 34pin 10 PJ445 Keyboard connector 34pin11 PJ334 PAD connector 5pin Table C-11 PAD connector 5pinTable C-12 FL board I/F connector 13pin 12 PJ9 FL board I/F connector 13pin13 PJ6002 Speaker I/F connector 2pin Table C-13 Speaker I/F connector 2pin14 PJ100 MI Board I/F connector 100pin Table C- 14 MI Board I/F connector 100pin 1/215 PJ4100 Network I/F connector 10pin Table C-15 Network I/F connector 10pin16 PJ1 Docking I/F connector 50pin Table C-16 Docking I/F connector 50pin19 PJ8760 RTC battery connector 3pin 17 PJ8800 DC-IN connector 2pin18 PJ8810 Battery connector 10pin 20 PJ8780 FAN connector 3pin21 PJ3 HD Board I/F connector 80pin Table C- 21 HD Board I/F connector 80pin 1/2IDRSTA-P3N GND MDC-B3V 22 PJ1002 Memory connector 200pin Table C-22 Memory connector 200pin 1/4SDQS3R-B2P GND SDQ27R-B2P SDQ31R-B2P SDQ26R-B2P SDQ30R-B2P Table C-22 Memory connector 200pin 3/4 SDQ63R-B2P Table C-23 SC board I/F connector 13pin FL Board 23 PJ501 SC board I/F connector 13pin24 PJ500 System board I/F connector 13pin Table C-24 System board I/F connector 13pinHD Board 25 PJ1 System board I/F connector 88pin Table C-25 System board I/F connector 88pin1/2Table C-25 System board I/F connector 88pin2/2 26 PJ2 HDD I/F connector 44pin Table C-26 HDD I/F connector 44pin27 PJ3 MDC I/F connector 30pin Table C-27 MDC I/F connector 30pinMI Board 28 PJ1 System board I/F connector 100pin1/2 Table C-28 System board I/F connector 100pin 1/2Table C-28 System board I/F connector 100pin 2/2 29 PJ351 Mini PCI I/F connector 124pin Table C-29 Mini PCI I/F connector 124pin 1/2Appendices Pin Assignment CBE2-P3N SC Board 30 PJ999 FL board I/F connector 13pin 31 PJ997 Headphone connector 5pin32 PJ998 External Microphone connector 5pin Apx. D Keyboard Scan/Character Codes Appendices Table D-1 Scan codes set 1 and set 2 1/4Caps Lock Enter Shift L No.102 ALT R 122 F11 123 F12 124 PrintSc 126 Pause 202 203 Win 204 App With left Shift With right Shift Set Table D-4 Scan codes with Fn key Table D-6 No.124 key scan code This key generates only make codes Figure E-1 Key layout UK Figure E-2 Key layout USAppendices Apx. E Key Layout Apx. F BIOS/KBC/EC Update Appendices F12Appendices Apx. F BIOS/KBC/EC Update Appendix G Reliability Apx. G Reliability AppendicesAppendices Apx. G Reliability Appendix H Key FD Apx. H Key FD
Related manuals
Manual 10 pages 31.4 Kb