3.24 SETUP | 3 Tests and Diagnostics |
(d)HDD Auto Off
Use this option to set the duration of the HDD automatic power off function. This option stops the rotation of the HDD if you do not read or write to the HDD more than the duration set.
xxMin. Automatically turns off the power to the hard disk drive if it is not used for the duration set. The duration xx can be set to 1, 3, 5, 10, 15, 20, 30.
(e)System Auto Off
Use this option to disable or set the duration of the system automatic off function in Resume mode. This option turns off the power to the system at the time set if the computer is not used. In Boot mode, this is disabled.
Disabled | Disables system automatic power off. |
xxMin. Automatically turns off the power to the system if it is not used for the duration set. The duration xx can be set to 10, 20, 30, 40, 50 or 60 minutes or Disabled.
(f)LCD Brightness
Use this option to set the level of LCD brightness.
Full brightness for maximum visibility. | |
Bright | Full brightness for high visibility. |
Less than full brightness for saving power. |
(g) Cooling Method |
|
Maximum Performance | If the CPU becomes too hot, the fan turns on |
| automatically in a high speed to cool down the |
| CPU. |
Performance | If the CPU becomes too hot, the fan turns on |
| automatically. When the CPU temperature falls |
| to a normal range, the fan turns off. |
Battery optimized | If the CPU becomes too hot, the processing |
| speed is lowered. If the temperature is still too |
| high, the fan turns on. When the CPU |
| temperature falls to a normal range, the fan is |
| turned off and the processing speed is increased. |
NOTE: Too hot condition may cause defect on the CPU. When the hot condition continues, the power is automatically turned off in resume mode.
PORTEGE R100 Maintenance Manual |