Toshiba 4200FA Inspection of the new UPS equipment After Uncrating, Storage of UPS equipment

Page 17

TOSHIBA

Inspection of the new UPS equipment

After Uncrating:

1)Check the unit for loose, broken, bent or other damaged parts. If damage has occurred during shipment, keep all original crating and packing materials for return to the shipping agent. The equipment warranty will not apply to units that are damaged during shipment.

2)Check to see that the rated capacity and the model number specified on the nameplate conform to the order specifications.

2.4Storage of UPS equipment

If the UPS equipment is to be subject to long or short-term storage, the following guidelines should be used.

Avoid:

1)Storage in sites subject to extreme changes in temperature or high humidity.

2)Storage in sites subject to exposure of high levels of dust or metal particles.

3)Storage on inclined floor surfaces or in sites subject to excessive vibration.

Before storing:

1)Charge the system's batteries.

2)Perform a complete system shutdown as described in section 5.18 of this manual.

Storing:

1)Store within a temperature range of - 4° to 104° F (-20° to 40° C).

2)For best results, store the UPS in the original shipping container and place on a wood or metal pallet.

3)The optimum storage temperature is 70° F (21° C). Higher ambient temperatures cause UPS batteries to need recharging more frequently.

4)If stored in an ambient temperature under 68° F (20° C), recharge the batteries every 9 months.

5)If stored in an ambient temperature of 68° to 86° F (20° to 30° C), recharge the batteries every 6 months.

6)If stored in an ambient temperature of 86° to 104° F (30° to 40° C), recharge the batteries every 3 months.

2.5Disposal

Please contact your state environmental agency for details on proper disposal of electrical components and packaging in your particular area.

ATTENTION It is ILLEGAL to dump lead-acid batteries in landfills or dispose of improperly. Please help our Earth by contacting the environmental protection agencies in your area, the battery manufacturer, or call Toshiba toll-free at (800) 231-1412 for more information about recycling batteries.

16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 4200FA Toshiba Uninterruptible Power Supply Manual’s Purpose and Scope General Safety Instructions Special Symbols Equipment Warning Labels Toshiba Table of Contents UPS Protection System 15 kVA 25 kVA 30 kVA 33 kVA 50 kVA Rated Output Rating Important Safety InstructionsToshiba Conserver CES Instructions Power Conditioning Power BackupTheory of Operation Application and UseUncrating the new UPS equipment 15/25/30/33kVA Uncrating the new UPS equipment 50kVA Storage of UPS equipment Inspection of the new UPS equipment After UncratingAvoid Before storingEquipment Placement Operating Precautions System Preparation Pre-PowerPower Connections 15/25/30/33 kVA with Internal Batteries Power Connections 15/25/30/33kVA with Internal Transformer Maximum Wire Size is 2 AWG Phase a B C 15 kVA 25 kVA 30/33 kVA Input H1 H2 H3Torque Torque L1 L2 L3 Inch-lbs L1-L3Power Connection Cable Routing and Conduit Placement 15/25/30/33 kVA Battery ConnectionH1 H2 H3 N L1 L2 L3 N + Power Connections 50 kVA250MCM In-lbs Maximum Wire Size for Battery is 250MCM Battery + 50 kVAPhase a B C 50 kVA Input H1 H2 H3 H1 H2 H3Power Connection Cable Routing Terminal # AWG Torque Control Circuit and External Interface ConnectionsCommunication Interface Remote Contact UPS Shutdown via RS-232C 2 RS-232C15 kVA 25 kVA 4200FA 15/ 25kVA w/Internal Transformer 30 kVA 33 kVA 4200FA 30/ 33kVA w/Internal Transformer 50 kVA 4200FA 50kVA w/Internal Transformer Power flow in AC Input Mode Bypass Mode Operating the UPS AC Input Mode Normal OperationPower flow in battery backup mode Models 15/25/30/33/50 kVA Battery Backup Time and Discharge ProcessBattery Low Voltage Tolerances Charge Battery RechargingRated Battery Voltages Front Panel Layout All Units EPO Emergency Power Off FunctionAudible Alarm Functions Condition Audible pattern LED Light Emitting Diode System Status LED Light Emitting Diode FunctionsLCD Liquid Crystal Display Functions Line-2 System Fault MessagesLine-1 System Messages Display Message TranslationLine-4 Messages Line-4 System MessagesDisplayed Message Translation DcocUPS Start UP Please Wait Initial Battery ChargeStart-up Procedure Output Shut Down Output VOLTAGE= 0V CURRENT=LOW/LOW/LOW% Shutdown ProcedureFrom UPS to Maintenance Bypass Maintenance Bypass ProcedureKeypad Overview Stop21.3 OUT Key Functions Moni21.2 Batt Test Key Batt KeyMENU, F1, ENTER, UP, & Down Keys Buzz Stop Key Reset KeySettings for Display Duration Menu Data Screens Settings for Calendar and ClockAdjusting the Buzzer Volume Serial Com Station Address Run Switch SelectCharge Mode Select Output Voltage AdjustmentOverload Operation Reset to Default SettingsBackup History and Fault History Backup History # #MIN##SEC VB=324V BT *PF OL System Protection Functions System Protection FeaturesStart-up Preventive MaintenanceSemi-Annual maintenance Parts ReplacementQuarterly Maintenance External Dimensions 15/25/30/33kVA External Dimensions 50kVA Shipping Dimensions and Weights Toshiba
Related manuals
Manual 2 pages 31.25 Kb Manual 10 pages 38.21 Kb Manual 10 pages 38.25 Kb

4200FA specifications

The Toshiba 4200FA is a multifunctional printer that stands out in both small office and corporate environments. Esteemed for its reliability and efficiency, the Toshiba 4200FA offers businesses a versatile solution for their printing, scanning, copying, and faxing needs. One of its primary strengths is the ability to handle large print volumes, which makes it an ideal choice for high-demand settings.

Equipped with advanced printing technology, the Toshiba 4200FA delivers impressive print speeds of up to 42 pages per minute. This speed allows users to complete large jobs quickly, significantly minimizing downtime in busy workplaces. The device supports various paper sizes, ranging from standard letter to legal and custom dimensions, meeting diverse business requirements.

The resolution of up to 1200 x 1200 dpi ensures that printed documents are sharp and professional, suitable for both internal communications and customer-facing materials. Moreover, the Toshiba 4200FA is designed for user-friendliness, featuring an intuitive touch-screen interface that simplifies navigation, making it easy for employees to operate the machine without extensive training.

In terms of connectivity, the Toshiba 4200FA is equipped with multiple options including USB, Ethernet, and Wi-Fi capabilities, enabling seamless integration into existing workflows. Additionally, it is compatible with various mobile printing solutions, allowing users to print from their smartphones and tablets directly, which is increasingly essential in today’s mobile-centric work environments.

Security is also a priority for the Toshiba 4200FA. With features such as secure printing, user authentication, and data encryption, the device ensures that sensitive information remains protected against unauthorized access. This is particularly valuable for organizations that handle confidential documents.

Sustainability is another noteworthy aspect. The Toshiba 4200FA incorporates energy-efficient technologies that reduce power consumption during both operation and standby modes. Its long-life consumables and duplex printing capabilities further contribute to reducing overall waste and operational costs.

In summary, the Toshiba 4200FA is a robust multifunction printer that offers excellent speed, quality, versatility, and security, making it a valuable addition to any business environment looking to enhance productivity and efficiency while maintaining control over costs and resources.
Top Page Image Contents