Toshiba 4200FA user manual Manual’s Purpose and Scope

Page 4

TOSHIBA

Manual’s Purpose and Scope

This manual provides information on how to safely install, operate, and maintain your TIC power electronics product. This manual includes a section of general safety instructions that describes the warning labels and symbols that are used throughout the manual. Read the manual completely before installing, operating, or performing maintenance on this equipment.

This manual and the accompanying drawings should be considered a permanent part of the equipment and should be readily available for reference and review. Dimensions shown in the manual are in metric and/or the English equivalent.

Toshiba International Corporation reserves the right, without prior notice, to update information, make product changes, or to discontinue any product or service identified in this publication.

TOSHIBA is a registered trademark of the Toshiba Corporation. All other product or trade references appearing in this manual are registered trademarks of their respective owners.

Toshiba International Corporation (TIC) shall not be liable for direct, indirect, special, or consequential damages resulting from the use of the information contained within this manual.

This manual is copyrighted. No part of this manual may be photocopied or reproduced in any form without the prior written consent of Toshiba International Corporation.

© Copyright 2005 Toshiba International Corporation.

All rights reserved.

Printed in the U.S.A.

Contacting Toshiba’s Customer Support Center

Toshiba’s Customer Support Center can be contacted to obtain help in resolving any Uninterruptilbe Power Supply system problems that you may experience or to provide application information.

The center is open from 8 a.m. to 5 p.m. (CST), Monday through Friday. The Support Center’s toll free number is US (800) 231-1412/Fax (713) 466-8773.

You may also contact Toshiba by writing to:

Toshiba International Corporation

13131 West Little York Road

Houston, Texas 77041-9990

Attn: UPS Product Manager.

For further information on Toshiba’s products and services, please visit our website at www.tic.toshiba.com.

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 4200FA Toshiba Uninterruptible Power Supply Manual’s Purpose and Scope General Safety Instructions Special Symbols Equipment Warning Labels Toshiba Table of Contents UPS Protection System Important Safety Instructions 15 kVA 25 kVA 30 kVA 33 kVA 50 kVA Rated Output RatingToshiba Conserver CES Instructions Power Backup Power ConditioningTheory of Operation Application and UseUncrating the new UPS equipment 15/25/30/33kVA Uncrating the new UPS equipment 50kVA Inspection of the new UPS equipment After Uncrating Storage of UPS equipmentAvoid Before storingEquipment Placement System Preparation Pre-Power Operating PrecautionsPower Connections 15/25/30/33 kVA with Internal Batteries Power Connections 15/25/30/33kVA with Internal Transformer Phase a B C 15 kVA 25 kVA 30/33 kVA Input H1 H2 H3 Maximum Wire Size is 2 AWGTorque Torque L1 L2 L3 Inch-lbs L1-L3Power Connection Cable Routing and Conduit Placement Battery Connection 15/25/30/33 kVAPower Connections 50 kVA H1 H2 H3 N L1 L2 L3 N +Battery + 50 kVA 250MCM In-lbs Maximum Wire Size for Battery is 250MCMPhase a B C 50 kVA Input H1 H2 H3 H1 H2 H3Power Connection Cable Routing Control Circuit and External Interface Connections Terminal # AWG TorqueCommunication Interface Remote Contact 2 RS-232C UPS Shutdown via RS-232C15 kVA 25 kVA 4200FA 15/ 25kVA w/Internal Transformer 30 kVA 33 kVA 4200FA 30/ 33kVA w/Internal Transformer 50 kVA 4200FA 50kVA w/Internal Transformer Operating the UPS AC Input Mode Normal Operation Power flow in AC Input Mode Bypass ModePower flow in battery backup mode Battery Low Voltage Tolerances Battery Backup Time and Discharge ProcessModels 15/25/30/33/50 kVA Rated Battery Voltages Battery RechargingCharge Audible Alarm Functions EPO Emergency Power Off FunctionFront Panel Layout All Units Condition Audible pattern LED Light Emitting Diode Functions LED Light Emitting Diode System StatusLine-2 System Fault Messages LCD Liquid Crystal Display FunctionsLine-1 System Messages Display Message TranslationLine-4 System Messages Line-4 MessagesDisplayed Message Translation DcocInitial Battery Charge UPS Start UP Please WaitStart-up Procedure Shutdown Procedure Output Shut Down Output VOLTAGE= 0V CURRENT=LOW/LOW/LOW%Maintenance Bypass Procedure From UPS to Maintenance BypassStop Keypad Overview21.2 Key Functions Moni21.3 OUT MENU, F1, ENTER, UP, & Down Keys Batt KeyBatt Test Key Reset Key Buzz Stop KeyAdjusting the Buzzer Volume Menu Data Screens Settings for Calendar and ClockSettings for Display Duration Run Switch Select Serial Com Station AddressOutput Voltage Adjustment Charge Mode SelectReset to Default Settings Overload OperationBackup History and Fault History Backup History # #MIN##SEC VB=324V BT *PF OL System Protection Features System Protection FunctionsPreventive Maintenance Start-upQuarterly Maintenance Parts ReplacementSemi-Annual maintenance External Dimensions 15/25/30/33kVA External Dimensions 50kVA Shipping Dimensions and Weights Toshiba
Related manuals
Manual 2 pages 31.25 Kb Manual 10 pages 38.21 Kb Manual 10 pages 38.25 Kb

4200FA specifications

The Toshiba 4200FA is a multifunctional printer that stands out in both small office and corporate environments. Esteemed for its reliability and efficiency, the Toshiba 4200FA offers businesses a versatile solution for their printing, scanning, copying, and faxing needs. One of its primary strengths is the ability to handle large print volumes, which makes it an ideal choice for high-demand settings.

Equipped with advanced printing technology, the Toshiba 4200FA delivers impressive print speeds of up to 42 pages per minute. This speed allows users to complete large jobs quickly, significantly minimizing downtime in busy workplaces. The device supports various paper sizes, ranging from standard letter to legal and custom dimensions, meeting diverse business requirements.

The resolution of up to 1200 x 1200 dpi ensures that printed documents are sharp and professional, suitable for both internal communications and customer-facing materials. Moreover, the Toshiba 4200FA is designed for user-friendliness, featuring an intuitive touch-screen interface that simplifies navigation, making it easy for employees to operate the machine without extensive training.

In terms of connectivity, the Toshiba 4200FA is equipped with multiple options including USB, Ethernet, and Wi-Fi capabilities, enabling seamless integration into existing workflows. Additionally, it is compatible with various mobile printing solutions, allowing users to print from their smartphones and tablets directly, which is increasingly essential in today’s mobile-centric work environments.

Security is also a priority for the Toshiba 4200FA. With features such as secure printing, user authentication, and data encryption, the device ensures that sensitive information remains protected against unauthorized access. This is particularly valuable for organizations that handle confidential documents.

Sustainability is another noteworthy aspect. The Toshiba 4200FA incorporates energy-efficient technologies that reduce power consumption during both operation and standby modes. Its long-life consumables and duplex printing capabilities further contribute to reducing overall waste and operational costs.

In summary, the Toshiba 4200FA is a robust multifunction printer that offers excellent speed, quality, versatility, and security, making it a valuable addition to any business environment looking to enhance productivity and efficiency while maintaining control over costs and resources.
Top Page Image Contents