Toshiba 1600XP operation manual Signal Words, Regulatory Compliance Statement, FCC Class a Notice

Page 12

1.2 Signal Words

The signal words listed below are used throughout this manual. When the words DANGER, WARNING, CAUTION and NOTICE are used in this manual they will include important safety information that must be carefully followed.

DANGER

The word DANGER in capital letters preceded by the safety alert symbol indicates that an imminently hazardous situation exists, and if not avoided will result in loss of life or serious injury to personnel.

WARNING

The word WARNING in capital letters preceded by the safety alert symbol indicates that a potentially hazardous situation exists, and if not avoided may result in loss of life or serious injury to personnel.

CAUTION

NOTICE

The word CAUTION in capital letters preceded by the safety alert symbol indicates that a potentially hazardous situation exists, and if not avoided may result in minor or moderate injury.

The word NOTICE in capital letters without the safety alert symbol indicates a potentially hazardous situation exists, and if not avoided may result in equipment and property damage.

1.3 Regulatory Compliance Statement

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required

to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation.

Notice: The FCC regulations provide that changes or modifications made to this device that are not approved by Toshiba International Corporation may void the authority granted to the user by the FCC to operate this equipment.

EMC Directive Class A Note

This UPS is commercial in design and not intended for use at anytime in a Residential Environment.

2

1600XP Series Installation and Operation Manual

Image 12
Contents 1600XP Series Page Product Use and Warranty Restrictions Qualified Personnel onlyUninterruptible Power System UPS Purpose Toshiba Customer Support CenterToshiba Customer Support Center Toshiba International CorporationPage Table of Contents Screen Tab Settings Optional MB Maintenance Bypass UnitsPreventive Maintenance/Parts Replacement Display and KeysExternal Layouts/Dimensions/Shipping Weights Appendix a 1600XP SpecificationsIndex Iii Page General Safety Instructions SymbolsProhibited Symbol indicates do not take action Signal Words Regulatory Compliance StatementFCC Class a Notice EMC Directive Class a NoteEquipment Warning Labels Critical Fuse Sizing14 15 16 Important Safety Instructions 20 a45 a 60 a 80 a 100 a 125 a 144 Vdc 216 Vdc 288 VdcQualified Personnel Only Qualified personnel shallTo be performed by Qualified Personnel Only Inspection/Storage/Disposal InspectionUnpacking StorageInstallation Precautions UPSPage Operating Precautions Conductor Routing and GroundingUPS Connections Terminal BlockOutput Cabling for VoutWire Size and Tightening Torque Number KVA 10 kVA 14-18 kVA 22 kVA Lb.-in. NmOptional Battery Cabinet Connections UPS Model Battery Cabinet Mccb CapacityPower Backup Power ConditioningProduct Description Application and UseOperating Modes Static-Bypass Stop operationOn-Line Run operation Battery Backup On batteries EPO Emergency Power Off FunctionBattery Backup Time and Discharge Process Battery Low Voltage TolerancesUPS Capacity Battery Recharging Model Vmax Vmin IchargeCommand Options Starting the UPS Stopping the UPSDisplay and Keys Front Panel LayoutDisplay Manual Controls 1600 XP Monitor and Settings screens Operating KeysRecords screens BATStatus Indicators Light Emitting Diodes LEDEnd Test Faults Operation Input Bypass Batt History Backup SystemTouchscreen Menu Tree Output DC Bus Ctrl/Cfg Disp/ReyeKeypad Controls Change Secu. LvlShift again Write keyScreen Security Passwords & Key Pad LoginScreen Tab Main RUN/Stop the UPSScreen Tab Monitor Mimic DisplayMonitor Details Mimic Display Records Sample Record ScreensAudible Alarm Functions ConditionScreen Tab Settings Key Cmd ID range Types of ParametersDISP/REYE Block Changing UPS Parameter Settings No of Input Line 240VSettings Parameters Access Level Sec. AbbreviationUSR ADMRecalibrate the Touchscreen Calibration ScreenMA rms Vac peak MA peak Pin Signal Function Logic UPS Communication InterfacesRemote Contacts Current Vdc peak MA peakUPS LAN Shutdown Signal Operation Pin Symbol Description18.3 RS-232C RemotEye III Network Card 18.5 EMDOptional MB Maintenance Bypass Units Internal Maintenance BypassLED OFF External Maintenance Bypass Battery Pack Replacement Optional Receptacle Panel Installation Instructions System Protection Features UPS Protection SystemSystem Protection Functions Overheating Overcurrent Current Limit OverloadPreventive Maintenance/Parts Replacement Preventive MaintenanceCleaning the Touchscreen Overvoltage OvercurrentSystem Fault Messages Display Recrd Meaning ActionSystem Warning Messages Display Record Meaning ActionBsdv BtstflBypov BypuvSystem Mode Messages System Status MessagesDisplay Meaning Display Meaning ActionLansd PfailRmtsd RO2EEERRParts Replacement Batt AMB Temp Average LifetimeExternal Layouts/Dimensions/Shipping Weights Unit and Shipping WeightsDimensional Data Electrical Conduit Knock-out DataExternal Layout for 3.6kVA and 6kVA units Snmp Port Remote Eye Slot Appendix a 1600XP Specifications Standard Model 3.6 10 kvaUnit Capacity 6kVA 3.1 kW KVA 5.1 kW KVA 6.8 kW KVA 8.5 kW Standard Models 3.6 10 KVA CONT’D Battery System Battery Replacement YuasaStandard Models 14 22 kva Capacity KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW1Standard Models 14 22 KVA CONT’D Toshiba Part Number for 51896-FS 60995-FS Battery Pack Capacity KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW 1Appendix B 1600XP Command Parameter Table On LCDTab Block ToshibaToshiba H3 NoneFierr OUTChangeable Service Software compenents 251 Vref PhAdj BYP Dcuv SW Dcov SWDcub SW BattChrgov RUN StopUSER, Admin AdminDvcoh ViovLansd On LCD Hist 707 Total VIUVs Total No. Of Input Undervoltage Settings 721 Total Sys Total No. of System Changes Settings Begin and end the user will be required to touch On LCD Page Appendix C 1600XP Dimensions and Weights KVA DimensionsKVA Dimensions w/ MBS KVA Dimensions 14 / 18 / 22 kVA Dimensions w/ Optional MBS Index RS232 Ascii A5 Page UPS Page Industrial Division
Related manuals
Manual 90 pages 35.4 Kb

1600XP specifications

The Toshiba 1600XP is an advanced multifunction printer that showcases Toshiba's commitment to innovation and reliability in office technology. Designed to meet the demands of modern businesses, the 1600XP integrates several features and technologies that enhance productivity while ensuring high-quality output.

One of the key characteristics of the Toshiba 1600XP is its impressive speed. Capable of printing up to 16 pages per minute, this printer is well-suited for busy work environments where efficiency is paramount. The first print-out time is remarkably fast, minimizing wait times and allowing users to get back to their tasks quickly.

In addition to its speed, the Toshiba 1600XP boasts exceptional print quality. With a high resolution of up to 1200 x 1200 dpi, it produces sharp, clear text and vibrant images, making it ideal for both document printing and professional presentations. The printer uses advanced laser technology, which contributes to consistent and reliable output over time.

The Toshiba 1600XP also integrates advanced scanning capabilities, allowing users to digitize documents with ease. It offers both color and monochrome scanning options, with various file formats available, including PDF and JPEG. The automatic document feeder (ADF) simplifies the scanning process by enabling batch scanning, increasing productivity for users who frequently digitize materials.

Connectivity options are a significant highlight of the Toshiba 1600XP. It comes equipped with USB and Ethernet interfaces, facilitating seamless integration into any office network. For organizations that value mobility, the printer also supports mobile printing solutions, allowing users to print directly from their smartphones or tablets using popular applications.

Energy efficiency is another important aspect of the Toshiba 1600XP. The device is designed to minimize power consumption without compromising performance. Toshiba has incorporated eco-friendly features that help businesses reduce their carbon footprint, making it a practical choice for environmentally conscious organizations.

In summary, the Toshiba 1600XP is a multifunction printer that excels in speed, print quality, and versatility. With its robust scanning capabilities, extensive connectivity options, and energy-efficient design, the 1600XP stands out as an outstanding solution for businesses looking to enhance their document management processes. Whether it's printing, scanning, or copying, the Toshiba 1600XP delivers excellent performance to meet the needs of any fast-paced office environment.