Front Panel
TUBE DRIVEN LEAD CHANNEL | RHYTHM CHANNEL |
GUITAR | GAIN | PREAMP | LOW | MID | HIGH | VOLUME | LOW | MID | HIGH | |
INPUT | CLASSIC CRUNCH |
|
|
|
|
|
|
|
| |
| CLEAN | wAv |
|
|
|
|
|
|
|
|
|
|
|
|
|
| BOOST ON | CHANNEL SELECT |
| SHIFT | |
1 | 2 | 3 | 4 | 5 | 6 |
| 9 | 11 | 12 | 14 |
|
|
|
|
|
| 7 | 8 | 10 |
| 13 |
Guitar Input Jack:
This is a 1/4" 2- conductor input jack for plugging in your instrument. It is intended for guitars but will accept other instruments as well.
Lead Channel Gain:
Adjust clockwise to increase the amount of distortion. Used in the lower ranges of the control, you get a less distorted sound, a "bluesy" tone. As you increase the gain, you add tremendous amounts of distortion to the signal for a harder edged "crunch" tone.
Lead Channel Preamp Selector:
This
overdrive
Classic-
Crunch- High gain with a cutting midrange.
wAv- Modern, extreme high gain.
Lead Channel Low:
Controls the selected passive tone stack’s low frequencies when Lead Channel is selected.
Lead Channel Mid:
Controls the selected passive tone stack’s mid frequencies when Lead Channel is selected.
Lead Channel High:
Controls the selected passive tone stack’s high frequencies when Lead Channel is selected.
Lead Channel Boost switch:
Gives a 6 dB boost to the current lead channel setting and selects the Boost preset that is stored in the selected favorites bank. It works with or without the footswitch connected. This option is perfect for bringing you above the mix when taking a solo.
|
|
| DIGITAL EFFECTS |
VOLUME | FAVORITES |
| GROUP LEVEL |
| 1 | 2 | DEL |
|
| ||
| SAVE |
| MOD |
| 3 | 4 | REV |
|
|
| PUSH ON |
16 | 17 | 19 | 20 | 21 | 22 | 23 | 24 |
1518
Lead Channel LED:
Indicates Lead channel is active.
Lead Channel Master Volume:
Controls the overall output of the amplifier when the lead channel is selected.
Channel Select switch:
Selects Lead or Rhythm channel and Lead or Rhythm preset stored in selected Favorites Bank.
Rhythm Channel Low:
Controls the passive tone stack’s low frequencies when Rhythm Channel is selected.
Rhythm Channel Mid:
Controls the passive tone stack’s Mid frequencies when Rhythm Channel is selected.
Rhythm Channel Shift switch:
When engaged, this switch will boost the bass response of the rhythm channel and give you a fuller, rounder tone.
Rhythm Channel High:
Controls the passive tone stack’s high frequencies when Rhythm Channel is selected.
Rhythm Channel LED:
Indicates Rhythm channel is active.
Rhythm Channel Master Volume:
Controls the overall output of the amplifier when the Rhythm channel is selected.
Save Button:
This button saves any changes that were made to the Favorites. Whenever a favorite has been edited, the button pad will blink to indicate edit mode. Now you have the choice of storing the change by pressing Save, or just use the change temporarily by not permanently altering your last saved setting.
6