Front Panel and Footswitch
TUBE DRIVEN LEAD CHANNEL | RHYTHM CHANNEL | DIGITAL EFFECTS |
GUITAR | GAIN | PREAMP | LOW | MID | HIGH | VOLUME | LOW | MID | HIGH | VOLUME | FAVORITES |
| GROUP LEVEL | ||
INPUT |
| CLASSIC | CRUNCH |
|
|
|
|
|
|
|
|
|
|
|
|
|
| CLEAN | wAv |
|
|
|
|
|
|
|
|
| 1 | 2 | DEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| SAVE |
| MOD |
|
|
|
|
|
|
|
|
|
|
|
|
| 3 | 4 | REV |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PUSH ON |
|
|
|
|
|
|
| BOOST ON | CHANNEL SELECT |
| SHIFT |
|
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | 9 |
| 11 | 12 | 14 | 16 | 17 | 19 | 20 | 21 | 22 | 23 | 24 |
|
|
|
|
| 7 | 8 | 10 |
| 13 |
| 15 | 18 |
|
|
|
|
|
|
FAVORITES
LEAD RHYTHM
1 | 2 | 3 | 4 | CHANNEL SELECT | BOOST | EFFECTS |
25 | 26 | 27 | 28 |
Favorites buttons:
These buttons select a Favorites bank. Each channel (Lead or Rhythm) and the “Boost On” function, has 4 Favorites banks associated with it for a total of 12 Favorites Presets. These presets are activated by the “CHANNEL SELECT” button 
and the “BOOST ON” button 
. The “BOOST ON” preset cannot be selected in the rhythm channel. For more information, see “Using the Effects Processor” on page 9.
Group Buttons:
These buttons allow you to select one of 15 effects or to bypass each group. The 3 types of groups are Delay, Modulation, and Reverb. For more information, see “Using the Effects Processor” on page 9.
Level/Push on:
When rotated, this control adjusts the level of the lighted effect group. Pushing the knob turns the digital effects section on and off. For more information, see “Using the Effects Processor” on page 9.
Active Status:
This section of the display shows which preset is active and if the digital effects section is on or off.
times. The Effect Group name with an illuminated red rectangle around it will be edited by rotating the “LEVEL” control 
. Press one of the 3 “GROUP” buttons 
once to edit the level of selected effect group.
Level Status:
Indicates the level of each effect group.
Footswitch Favorites Buttons:
Duplicates Favorites buttons 
on Front Panel. LED above switch is lit when selected. Front panel buttons 
still work when Footswitch is connected.
Footswitch channel select:
Duplicates “CHANNEL SELECT” button 
on front panel. LEDs above this switch indicate which channel is selected. Front Panel channel select switch 
still works when Footswitch is connected.
Footswitch Boost:
Duplicates “BOOST ON” button 
on front panel. LED above this switch indicates Boost is on. Lead channel must first be active to activate boost. Switching to Rhythm channel or pressing “Boost” again 
still works when footswitch is connected.
Effect Status:
This section of the display indicates the name of the effect selected in each group. The word “BYPASS” is used when no effect in that group is used.
Group Edit Status:
The name of the effect group is displayed at all
Footswitch Effects On/Off:
Turns on and off the Digital effects. LED is lit when effects are on. Level push switch 
still works when Footswitch is connected.
7