MartinLogan E2 CONNECTIONS-EXOS Crossover Inputs, Exos signal inputs. Balanced connection shown

Page 21

CONNECTIONS—EXOS CROSSOVER INPUTS

Connect the outputs of the Preamplifier/Processor to the inputs of the EXOS using either balanced or single ended connections. There are right channel, left channel and optional 0.1 effects channel inputs.

WARNING! Use either all balanced or all single ended connections for signal inputs. Do not use both.

Figure 46. EXOS signal inputs. Balanced connection shown.

Connections—Exos Crossover Inputs 21

Image 21

Contents A T E M E N T TM E Contents Master Packing List Before YOU BeginRequired Tools Unpacking the Statement E2Initial Speaker Placement Speaker PlacementWall Behind the Listener Wall Behind the SpeakersSubwoofer Tower Assembly AssemblyAssembly Assembly Assembly Assembly Transition/Electrostatic Tower Assembly Finished transition tower assembly Assembly Assembly Assembly Assembly Tighten frame bolts as shown Assembly Assembly Assembly Assembly CONNECTIONS-EXOS Crossover Inputs Exos signal inputs. Balanced connection shownCONNECTIONS-EXOS Crossover Outputs Subwoofer OutputsFull Range Outputs Bi-Wire Connection CONNECTIONS-ESL/TRANSITION TowersHorizontal Passive Bi-Amplification Vertical passive bi-amplification. One Channel shown Vertical Passive Bi-AmplificationCONNECTIONS-SUBWOOFER Towers Ohm ConnectionOhm/Bi-Amp Connection High-Pass Settings Passive HIGH-PASS SettingsOpen not connected jumpers Exos E2.5 IEC power cord AC receptacle AC Power ConnectionsMaking IT Work Together Setting the Dip SwitchesMaking It Work Together Part Subwoofer Level KnobMaking It All Work Together Part Five setting options for the 25Hz and 50Hz dip switchesESL Tower Spike Installation Speaker Placement Fine TuningHard Sound Tweaking the RoomMartinLogan, All rights reserved Rev. #100203