Siemens MCM 1755 NTD manuel dutilisation Introduction, Target group, Further information

Page 9

Introduction

Your new MCM 1755 NTD color monitor possesses a whole range of useful features and functions, e. g.:

17" (40 cm) high-resolution CRT (0.28 mm dot pitch)

automatic scanning of all horizontal frequencies from 30 to 69 kHz and all refresh rates (vertical frequencies) from 50 to 160 Hz

digital screen controller with microprocessor for storing 18 different display modes

freely adjustable color alignment for matching the screen colors to the colors of various input and output devices

VESA-DDC compatibility

power management for reducing power consumption by up to 95% when the PC system is not in use

compliance with the latest ergonomic standards (ISO 9241-3)

compliance with the recommendations in accordance with TCO ’95

This Operating Manual contains important information you require to start up and run your monitor.

The monitor interworks closely with the monitor controller (CRT controller, graphics card) of your PC. It processes the data supplied to it by the monitor controller. The monitor controller/the associated driver software is responsible for setting the modes (resolution and refresh rate).

Target group

You don't need to be an "expert" to perform the operations described here. Do, however, read the chapter with the important notes in the Operating Manual of your PC and in this Operating Manual.

In case of difficulties please contact your local service point.

Further information

Details of how you set the resolution and refresh rate are provided in the documentation on your monitor controller/the associated driver software.

A26361-K472-Z100-2-5E19

English - 1

Image 9
Contents MCM 1755 NTD A26361-K472-Z100-1-5E19 Sie haben Page MCM 1755 NTD Your training needs Contents Page Introduction Target groupFurther information Explanation of symbols Important notes SafetyColor monitor MCM 1755 NTD Manufacturers notes Energy StarCE certificate Color monitor MCM 1755 NTD FCC Class B Compliance Statement Important note on power cableColor monitor MCM 1755 NTD Disposal and recycling Power cable for devices distributed in the US and CanadaChecking the contents of the consignment Installing an ergonomic video workstation Connecting the monitor Color monitor MCM 1755 NTD Switching the monitor on Switching the monitor offOperation of the monitor Standby Suspend Adjusting the brightness and contrast Changing the monitor settingsAdjusting the brightness Adjusting the contrastAdjusting the horizontal or vertical position Setting picture size, position, edges and color temperatureAdjusting the horizontal or vertical size Correcting tilt or parallelogram distortionActivating the factory settings Setting the color temperatureDegaussing the screen Displaying stored settings Character color Transporting the monitor Cleaning the monitorDimensions and weight Technical dataAccessories Storable display modesEnvironmental data VESA-DDC-compatible VGA interfaceTilting and turning area Preset operating modesPin Meaning Pin assignment D-SUBError handling