Siemens MCM 1755 NTD manuel dutilisation Standby Suspend

Color monitor MCM 1755 NTD

Notes on power management

If your PC has a VESA DPMS (Video Electronics Standard Association, Display Power Management Signaling) power management function (energy-saving mode), your monitor will fully support this function. The monitor has a four-stage power management system.

Stage	ON	STANDBY	SUSPEND	OFF mode
		mode	mode
Power lamp	Green	Amber	Amber/green	Amber flashing
			flashing
Function	Monitor	Monitor	Monitor	Monitor
	operating	is dark	is dark	is dark
	normally
Power	Normal	Reduced	Reduced	Reduced
consumption	< 120 W	to < 55 W	to < 15 W	to < 5 W

If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption. The power lamp of the monitor changes color to indicate the status change.

If there is still no input, power consumption is further reduced (OFF mode).

Once an input is made at the PC the screen contents are redrawn and full power is restored.

The length of the individual stages is determined by the power management system of the PC. For detailed information on how energy-saving mode operates refer to the Operating Manual or Technical Manual of your PC.

The service life of your monitor will be extended if the OFF mode is

i switched to after 30 minutes at the earliest (setting in screen saver or in your PC's BIOS setup).

When the monitor is switched to OFF mode by the power management system a power consumption of up to 5 W is maintained to feed the circuit for redrawing the screen contents.

To cut off power consumption totally, press the ON/OFF switch on the front of the monitor.

A26361-K472-Z100-2-5E19 English - 15