Color monitor 175V
Pin assignment D-SUB (15-pin)
5 1
6
10
15 11
Pin | Meaning |
|
|
1 | Red video input |
|
|
2 | Green video input |
|
|
3 | Blue video input |
|
|
4 | Ground |
|
|
5 | DDC Return |
|
|
6 | Red video ground |
|
|
7 | Green video ground |
|
|
8 | Blue video ground |
|
|
Pin | Meaning |
|
|
9 | not connected |
|
|
10 | Logic ground |
|
|
11 | Ground |
|
|
12 | DDC data (SDA) |
|
|
13 | H. sync |
|
|
14 | V. sync |
|
|
15 | DDC Clock |
| (SCL) |
|
|
Error handling
Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another PC.
If you cannot solve the problem, contact our Help Desk.
The screen display is too small or not centered
The monitor recognizes an undefined mode (see "Technical data").
ÊAdjust the position and the size of the display and save your settings (see " Operation of the monitor").
Colors are impure or shifted
ÊDegauss the monitor (see "Operation of the monitor").
ÊEnsure that there are no devices or objects near the monitor which generate magnetic fields (e. g. loudspeakers).
The screen display is flickering
ÊSet an ergonomic refresh rate (≥ 75 Hz) using the PC software (see documentation for your PC or your screen controller/graphics card).
ÊEnsure that the monitor is kept at a distance of at least 30 cm from other monitors of the same construction type. With different monitors, the distance must be increased, if necessary.
English - 17 |