Colour monitor 463V FA
ÊMount the cover over the connections again.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the operating manual for your computer.
i | If your computer has two monitor ports ("onboard" screen controller and separate |
graphics card), the monitor port for the separate graphics card is usually active. |
ÊConnect the data cable to the (active) monitor port on the computer and secure the
ÊConnect the male receptacle of the power cable supplied to the monitor socket of the computer and ensure a secure connection.
ÊPlug the power connector of the computer into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i appropriate graphics drivers for your application software. Details of how to do this are provided in the documentation on your screen controller/the associated driver software.
Operation of the monitor
The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation.
Adjusting rake and rotation
The rake of the monitor can be adjusted by
Ê Grasp the monitor with both hands on the right and left edge of the casing and adjust it to the desired rake.
The monitor can be rotated by 45° from its centre position.
Ê Grasp the monitor with both hands on the right and left edge of the casing and rotate it into the desired position.
English - 9 |