Colour monitor 463V FA
Performing auto-adjustment of the monitor
ÊPress the MENU \ AUTO button for approx. 1 second while the OSD menu is switched off. The Auto Processing message is displayed.
Picture quality and position are set to optimum values for your system.
Adjusting contrast/background lighting
ÊPress the + or – button to call the Contrast / Backlight setting window. This setting window can also be called, when the OSD menu is locked.
Selecting input signal
The monitor can be operated with analogue or digital signals. You can switch between the analogue and the digital mode (depending on the graphics card you use).
ÊPress the INPUT button to change the mode of the input signal.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
ÊPress the MENU \ AUTO button and the + button simultaneously and hold them until the status indicator on the screen is completely filled.
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent the monitor from being switched off inadvertently or by an unauthorised person.
ÊPress the MENU \ AUTO button and the + button simultaneously and hold them until the status indicator on the screen is completely filled.
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked ON/OFF switch again.
Monitor settings using the OSD menu
With the buttons on the control panel, call up and use the integrated OSD
The OSD menu is available in different languages. The English menu names are used in i the following description (default setting). With the OSD function Language Select in the
Setup Menu you can select another language.
12 - English |