Siemens 463V FA manual Changing the monitor settings

Page 19

Colour monitor 463V FA

If your computer detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption (energy-saving mode). The power indicator of the monitor changes colour to indicate the status change.

Once an input is made at the computer the screen contents are redrawn and full power is restored.

For detailed information on how energy-saving mode operates refer to the Operating Manual or Technical Manual of the computer.

When the monitor is switched to the energy-saving mode by the power management

i system a power consumption of up to 3 W is maintained to feed the circuit for redrawing the screen contents.

To completely switch off the power consumption, switch off the computer or pull the plug of the monitor power cable out of the monitor socket of the computer.

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs.

Basic monitor settings with the floppy disk supplied

If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be set with the floppy disk supplied.

ÊInsert the supplied floppy disk into the floppy disk drive.

ÊOpen the Readme file on the floppy disk and follow the instructions in the file.

Your monitor should now already be properly adjusted. If none of the above operating systems is used or minor corrections are to be made to the screen display, then change the monitor settings with the OSD menu.

Monitor settings with the buttons of the control panel

MENU \ AUTO

-

+

INPUT

1

 

2

3

 

 

 

 

1 = Buttons for the OSD menu

2 =

Power indicator

 

(On-Screen-Display)

3 =

Power button

 

Use the buttons of the control panel to make the following monitor settings directly while the OSD menu is switched off.

A26361-K864-Z100-1-5E19

English - 11

Image 19
Contents Monitor Sie haben Page A26361-K864-Z100-1-5E19 Betriebsanleitung Operating Manual 463V FA LCD-Bildschirm LCD monitorPage Contents Page Target group IntroductionFurther information Important notes SafetyNotational conventions Transport CleaningCE marking Energy Star GuidelinesFCC Class B Compliance Statement Power cable for devices distributed in the US and Canada Power cableDeclaration of Conformity Checking the contents of the consignment Connecting the monitor Installing an ergonomic video workstationConnecting cables to the monitor Adjusting rake and rotation Connecting cables to the computerOperation of the monitor Stage Energy-saving mode Switching the monitor on/offBasic monitor settings with the floppy disk supplied Changing the monitor settingsLocking the OSD menu Performing auto-adjustment of the monitorAdjusting contrast/background lighting Selecting input signalColour monitor 463V FA Adjusting the brightness and contrast Performing auto-adjustmentAdjusting size and position Setting functions in the Advanced Menu menu Setting colour temperature and coloursActivating the factory settings Setting functions in the Setup Menu menuPurple Blue Dimensions and weight LCD monitor Technical dataRemoving the monitor base Environmental conditions AccessoriesVESA-DDC-compatible VGA interface Storable display modes Electrical dataStylus Meaning Preset operating modesPin assignment D-SUB MeaningStyl Meaning Trouble shootingHaving this problem? Check the following points Monitor port DVI-DColour monitor 463V FA Colour monitor 463V FA Colour monitor 463V FA