Siemens E50001-F710-A420-X-4A00 instruction manual Operational check out instructions

Page 14

Operational check out instructions

C

D

A B

 

C

D

Item

Description

ASpacer

BBlade

CContacts

DAuxiliary contacts

Figure 10: Blade

A

Item

Description

AAir gap

1/8" (3.2 mm)

Figure 11: Air gap

Operational check out instructions

Operational check out instructions for the type Vector® manual group-operated switch are detailed in the following steps:

1.Switches are fully adjusted and inspected before they leave the factory. There should be no need to adjust the switch unit.

2.Check the rotation of the hinge terminals. They should rotate approximately 180° with slight resistance.

3.The following checks should be performed independently on all three phases to verify proper operation of the switch and interrupters. This will be performed manually.

a)Close the switch fully and lock the operating handle into the CLOSE position of the lock segment. Bounce the blade toward the OPEN position. The blade should remain tightly against the stop. If the blade does not remain tightly against the stop, re-adjust the handle/lock segment assembly per the Operating handle adjustment procedure presented on page 13. Refer to Figure 10: Blade.

b)With the switch still fully closed and the interrupter cocked (set to trip), the lever should stick above the nylon bumper at least 1/8"

(3.2 mm). There should be no metal- to-metal contact between the interrupter's lever and the contact casting. The lever should rest in the air gap as shown in Figure 11: Air gap. Raise the interrupter lever and verify the lever clears without touching any metal.

c)Slowly open the switch and verify the following operations occur:

1.As the blade opens, the bottom of the blade touches the auxiliary contacts before the main blade leaves the main contacts (refer to Figure 12: Blade movement, detail A). This transfers the load from the main contacts to the auxiliary contacts. As the switch continues to open, the main contacts will part and no longer carry the load, while the auxiliary contacts carry the full load (refer to Figure 12: Blade movement, detail B).

Figure 12: Blade movement

Detail A

 

 

Detail B

 

 

C

D

C

D

A

B

 

A

B

 

C

D

C

D

Item

Description

Item

Description

 

 

 

 

A

Spacer

C

Contacts

 

 

 

 

B

Blade

D

Auxiliary contacts

 

 

 

 

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Type Vector Answers for energyQualified person Table of contents Introduction IntroductionSignal words Field service operation and warranty issues IntroductionTypical type Vector manual group-operated switch General descriptionDesign Type General descriptionScope General descriptionInspection and unpacking Receiving, handling and storageReceiving Shipping damage claimsReceiving, handling and storage Arrange for a carrier inspection of damage immediatelyLifting and moving StorageDescription InstallationInstallation Installation Open ClosedOperating handle adjustment procedure Operating handle adjustment procedureOperational check out instructions Operational check out instructionsOperational check out instructions Contactor connectionMaintenance MaintenanceMaintenance Remarks

E50001-F710-A420-X-4A00 specifications

The Siemens E50001-F710-A420-X-4A00 is a state-of-the-art industrial component that exemplifies Siemens' commitment to delivering advanced automation solutions. This particular model falls within the realm of programmable logic controllers (PLCs), which are pivotal in modern industrial automation systems.

One of the standout features of the E50001-F710-A420-X-4A00 is its exceptional processing speed. Equipped with a powerful processor, it allows for rapid execution of complex logic operations, ensuring high efficiency in manufacturing processes. Additionally, this PLC supports multitasking capabilities, enabling it to handle multiple processes simultaneously without compromising performance.

A notable characteristic of this model is its extensive I/O options. The E50001-F710-A420-X-4A00 comes with a variety of digital and analog input/output modules, providing flexibility in connecting to various sensors and actuators. This versatility makes it suitable for a wide range of applications, from simple machine control to complex production line systems.

The device is designed with robust communication interfaces, facilitating seamless integration with other equipment and systems. It supports diverse protocols, including Ethernet, Profibus, and Profinet, which enables easy connectivity to field devices and higher-level control systems. This characteristic makes it possible to implement Industry 4.0 initiatives, allowing for real-time data exchange and enhanced monitoring capabilities.

Another key feature of the Siemens E50001-F710-A420-X-4A00 is its user-friendly programming environment. It supports various programming languages as per the IEC 61131-3 standard, including ladder logic, structured text, and function block diagrams. Such flexibility enables engineers to choose the most intuitive and effective method for their specific applications.

In terms of reliability, this PLC is built to withstand harsh industrial conditions. Its robust construction ensures resistance to dust, moisture, and temperature fluctuations, making it suitable for deployment in various environments. Moreover, it includes built-in diagnostic tools that aid in troubleshooting and maintenance, thereby reducing downtime.

In summary, the Siemens E50001-F710-A420-X-4A00 stands out due to its high processing speed, extensive I/O capabilities, versatile communication interfaces, user-friendly programming options, and robust design. These features, combined with its reliability, make it an excellent choice for organizations seeking to enhance their automation processes and adapt to the evolving demands of the manufacturing industry. With the E50001-F710-A420-X-4A00, Siemens continues to lead the way in providing innovative solutions that drive efficiency and productivity in industrial automation.
Top Page Image Contents