Siemens E50001-F710-A420-X-4A00 instruction manual General description

General description

	Introduction
	Siemens type Vector® manual group-
	operated air switch is precision built
	equipment designed to function efficiently
	under normal operating conditions. It is
	designed and manufactured to operate
	within the parameters established in ANSI/
	IEEE and NEMA standards for
	disconnecting and load-interrupter
	switches. Performance requirements of
	these standards have been met or
	exceeded by these designs. Specific
	standards which apply include:
		ANSI/IEEE C37.30 Requirements for
		High-Voltage Switches
		ANSI/IEEE C37.32 High-Voltage
		Switches, Bus Supports and Accessories
		- Preferred Ratings, Construction
		Guidelines, and Specifications
		ANSI/IEEE C37.34 Test Code for High-
		Voltage Air Switches
		ANSI/IEEE C37.35 Guide for the
		Application, Installation, Operation and
Figure 1: Typical type Vector manual group-operated switch		Maintenance of High-Voltage
		Disconnecting and Interrupter Swiches
		ANSI/IEEE 1247 Interrupter Switches for
		Alternating Current, Above 1,000
		NEMA SG6 Power Switching
		Equipment.
	The instructions included in this instruction
	manual are provided to aid you in
	obtaining longer and more economical
	service from your Siemens type Vector
	manual group-operated air switch. For
	proper installation and operation, this
	information should be distributed to your
	operators and engineers.
	By carefully following these instructions,
	difficulties should be avoided. However,
	these instructions are not intended to
	cover all details of variations that may be
	encountered in connection with the
	installation, operation and maintenance of
	this equipment.
	Should additional information be desired,
	including replacement instruction
	manuals, contact your local Siemens
	representative.

6