Siemens E50001-F710-A420-X-4A00 Operational check out instructions, Contactor connection

Page 15

Operational check out instructions

2.As the blade continues to rotate open, the interrupter lever must make full metal-to-metal contact with the contactor (refer to Figure 13: Contactor connection). At this point, the load then transfers from the auxiliary contacts to the interrupter's lever arm so that the interrupter now carries the full load.

3.As the blade continues to rotate open, the interrupter will trip thus interrupting the load. The interrupter must trip while the lever arm is in metal-to-metal contact with the contactor. The interrupter should trip (fire) before the contactor is within 1/2" (12.7 mm) to 3/4" (19 mm) of the end of the lever (refer to Figure 14: Contactor space).

4.Continue to open the switch until the interrupter lever has cleared the end of the nylon push bar, the lever will spring back slightly. This allows the nylon bumper of the contactor assembly to engage the lever and lift the lever into position, when the switch is being closed. Open the switch fully.

4.Now, close the switch slowly. The following operations and checks should be made:

a)As the blade rotates closed, the push bar must pick up the lever at least 1/2" (12.7 mm) from the end of the lever (refer to Figure 15: Lever pick up).

b)Continue to close the blade, when the lever is at 90° to the interrupter, the push bar should be at least 1/2" (12.7 mm) from the side of the yoke. At no time during the closing of the switch should the push bar touch the connecting rod or yoke (refer to Figure 16: Push bar).

c)Close the switch completely and verify that the interrupter resets (cocks) for the next opening operation.

A

Item

Description

 

 

A

Contactor

 

 

Figure 13: Contactor connection

A

B

Item

Description

A1/2" (12.7 mm) to 3/4" (19 mm)

BNylon push bar

Figure 15: Lever pick up

d)In the fully closed position, the lever should rest on the bumper, and stick above the bumper at least 1/8"

(3.2 mm) (refer to Figure 17: Lever position).

e)These adjustment checks should be repeated on each independent switch blade/phase.

5.The switch is now ready for installation of the conductors.

A

Item

Description

A1/2" (12.7 mm) to

3/4" (19 mm)

Figure 14: Contactor space

A

Item

Description

A1/2" (12.7 mm) to

3/4" (19 mm)

Figure 16: Push bar

A B

Item

Description

AAir gap

BBumper

Figure 17: Lever position

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Answers for energy Type VectorQualified person Table of contents Introduction IntroductionIntroduction Signal words Field service operation and warranty issuesGeneral description Typical type Vector manual group-operated switchGeneral description General descriptionScope Design TypeShipping damage claims Receiving, handling and storageReceiving Inspection and unpackingArrange for a carrier inspection of damage immediately Receiving, handling and storageStorage Lifting and movingInstallation InstallationDescription Open Closed InstallationOperating handle adjustment procedure Operating handle adjustment procedureOperational check out instructions Operational check out instructionsContactor connection Operational check out instructionsMaintenance MaintenanceRemarks Maintenance

E50001-F710-A420-X-4A00 specifications

The Siemens E50001-F710-A420-X-4A00 is a state-of-the-art industrial component that exemplifies Siemens' commitment to delivering advanced automation solutions. This particular model falls within the realm of programmable logic controllers (PLCs), which are pivotal in modern industrial automation systems.

One of the standout features of the E50001-F710-A420-X-4A00 is its exceptional processing speed. Equipped with a powerful processor, it allows for rapid execution of complex logic operations, ensuring high efficiency in manufacturing processes. Additionally, this PLC supports multitasking capabilities, enabling it to handle multiple processes simultaneously without compromising performance.

A notable characteristic of this model is its extensive I/O options. The E50001-F710-A420-X-4A00 comes with a variety of digital and analog input/output modules, providing flexibility in connecting to various sensors and actuators. This versatility makes it suitable for a wide range of applications, from simple machine control to complex production line systems.

The device is designed with robust communication interfaces, facilitating seamless integration with other equipment and systems. It supports diverse protocols, including Ethernet, Profibus, and Profinet, which enables easy connectivity to field devices and higher-level control systems. This characteristic makes it possible to implement Industry 4.0 initiatives, allowing for real-time data exchange and enhanced monitoring capabilities.

Another key feature of the Siemens E50001-F710-A420-X-4A00 is its user-friendly programming environment. It supports various programming languages as per the IEC 61131-3 standard, including ladder logic, structured text, and function block diagrams. Such flexibility enables engineers to choose the most intuitive and effective method for their specific applications.

In terms of reliability, this PLC is built to withstand harsh industrial conditions. Its robust construction ensures resistance to dust, moisture, and temperature fluctuations, making it suitable for deployment in various environments. Moreover, it includes built-in diagnostic tools that aid in troubleshooting and maintenance, thereby reducing downtime.

In summary, the Siemens E50001-F710-A420-X-4A00 stands out due to its high processing speed, extensive I/O capabilities, versatile communication interfaces, user-friendly programming options, and robust design. These features, combined with its reliability, make it an excellent choice for organizations seeking to enhance their automation processes and adapt to the evolving demands of the manufacturing industry. With the E50001-F710-A420-X-4A00, Siemens continues to lead the way in providing innovative solutions that drive efficiency and productivity in industrial automation.
Top Page Image Contents