Kustom owner manual Profile System Two Specifications

Profile System Two

Specifications

Model	KPS-PM300	6 Channel Dual Powered Mixer
Output Power, Both Channels	145W per channel	4 Ohms @ 0.1% THD
	150W per channel	4 Ohms @ 1% THD
Driven
	170W per channel	4 Ohms @ 5% THD
	CH 1 - 4	Mic XLR Balanced, Line 1/4" Balanced/Un-balanced
Accepted Inputs	CH 5	Mic XLR Balanced, Line 1/4" Un-Balanced Mono or
		Stereo, Hi-Z instrument Un-Balanced Mono
	Aux	Mic & line 1/8" stereo, RCA Stereo. Any combination
		of these inputs can be used at once.
Frequency Response	20HZ-20kHz	Actual response is tailored to speaker cabinet for
		accurate acoustical response.
Total Harmonic Distortion	Less than 0.4%	Measured at 1VRMS (0dBv) at record output, preamp
		output, or monitor output.
Hum & Noise	-110 dB	Mic Input, Rs=150 ohm, 20-20kHz
	-60dB	Residual Noise, all level controls 0% (minimum)
	-55dB	Nominal System Noise, all level controls at 50%
	All Measurements made at 1kHz unless noted
	+70dB	Mic to Speaker Output (Ch 1 - 5)
	+70dB	Mic to Speaker Output (Aux)
	+50dB	Line to Speaker Output (CH 1 - 5)
System Gain per Channel	+50dB	Stereo Line to Speaker Output (CH 5)
	+45dB	Line to Speaker Output (Aux)
	+40dB	Mic to Sub Output ( measured using 80Hz)
	+40dB	Mic to Preamp Output
	+40dB	Mic to Monitor out
	+40dB	Mic to Record out
	+30dB	Power amp in to Speaker Output
Input Channel Equalization	Special curve that adjusts Bass and Treble frequencies
Master Equalization	100 to 10kHz, 7 Band, 1 Octave Graphic, all ±12dB
Sub Woofer	120Hz fixed, Low Pass
Digital Effects	24 bit DSP 16 preset stereo digital effects taylored for PA applications.
Phantom Power	+40V	Mic inputs (Ch 1 - 5)
	+5V	Mic input (Aux)
	USA/Canada	120VAC/60Hz, 200W nominal
Power Requirements	Europe	230VAC/50Hz, 200W nominal
	UK	230VAC/50Hz, 200W nominal
	Australia	240VAC/50Hz, 200W nominal
	Japan	100VAC/50-60Hz, 200W nominal
Dimensions & Weight	mm/kg	345 (Height) x 252 (Width) x 290 (Depth), 11 kg
	Inches/Pounds	13.6 (Height) x 10 (Width) x 11.5 (Depth), 24.2 lbs
Model	KPS-LS300	Profile System Two Loudspeaker System
Power Capacity	150W each	EIA RS-426
	300W each	Program Power (music power)
Frequency Response	60HZ-20kHz	+/- 3dB
Nominal Impedance	4 Ohms	Per Cabinet, Accurate acoustical response
Dimensions & Weight Per	mm/kg	542 (Height) x 272.2 (Width) x 290 (Depth), 11.6 kg
Cabinet	Inches/Pounds	21.4 (Height) x 10.75 (Width) x 11.5 (Depth), 25.5 lbs

18