Setup Instructions:
Making Connections:
•Using the Profile speaker cables, or a set of your own, connect an end of each cable into the speaker outputs of the mixer (R & W). Then connect the opposite end of each cable to the appropriate speaker cabinet input (Y). Hint: For ease of use, connect the right output jack (R) to the speaker cabinet on the right side of the mixer front and connect the left output jack (W) to the speaker cabinet on the left side of the mixer front. Doing this will ensure that the pan control (E) will be in sync with the appropriate speaker.
•If you are using a powered monitor, connect the input of the powered monitor to the monitor output jack (T) on the back of the mixer.
•If you are using a powered subwoofer, connect the input of the powered subwoofer to the sub output jack (U) on the back of the mixer.
•Be sure that the power switch (S) is set to the “off” position and then attach the AC cable to the AC input jack (X).
•Plug in the microphones and instruments you plan to use into the mic/line combination jacks (L & M). Note: If you are using an instrument that has a stereo output connect that one to the mic/line combination jack on channel 5 (M) using a stereo (tip/ring/sleeve) cable. If you are using a passive acoustic instrument, you should use the mic/line combination jack on channel 5 (M) and set the inst/line switch (H) to the inst position.
•If you are using an audio source, such as a CD player or computer, connect the output of the source to the RCA input jacks (I) or the line input jack (J).
•If you are using a microphone with a mini (1/8”) plug, you can use the mic in jack (K) to connect to the mixer.
Master Section:
•Turn the master volume control (3) and the monitor volume control (5)
•Set the master equalizer controls (2) to their center positions (0dB).
•If you are not using a subwoofer, set the sub volume to the center position. If you are using a subwoofer, set the sub volume to its lowest position.
•Turn the effects volume control (6)
Input Section:
•Turn all volume controls (G)
•Set the pan controls (E) to their 12 o’clock positions.
•Set the treble and bass controls (C & D) to their 12 o’clock positions.
•Turn the monitor controls (B & F)
•Turn the effects controls (A)
Playing:
•Turn the power switch (S) to the “on” position. Note: The power indicator (4) on the front of the mixer should now be lit.
•Turn the master volume control (3) clockwise to the 9 o’clock position and begin adjusting the volume controls (G) of the individual channels (that you are using) clockwise to reach desired level. After you are happy with the basic level, you then use the master volume control (3) to increase or decrease the overall amount of volume. Note: If you are using a powered subwoofer, adjust the sub volume slider (1) to the center position. After setting the basic level, you can then adjust this control to increase or decrease the output of the powered subwoofer.
•Adjust the treble and bass controls (C & D) on the individual channels and the master equalizer controls (2) to achieve the desired sound.
•Turn the master effects volume control (6) clockwise to the 9 o’clock position and begin adjusting the effects controls (A) on the individual channel to achieve the desired amount of digital effects for each channel. Note: You should also turn the effects selector control (7) to the desired effect selection and press the effects active switch (0) to the “on” position.
9