Toshiba 245, 225, e-STUDIO195 Using Bypass Tray, Media type Paper size Maximum sheet Capacity *1

Using Bypass Tray

Place paper on the bypass tray when you use the following media types as copy paper:

yThick paper (81 to 163 g/m2)

ySpecial media types such as tracing paper, sticker labels or overhead transparencies

yStandard size paper which cannot be placed in the drawers of the equipment and Paper Feed Unit (optional) (e.g. A5-R)

Using the bypass tray is recommended also for copying on standard-size paper other than those placed in the drawers. The following sizes are available for bypass copying:

Media type	Paper size	Maximum sheet
		capacity *1
Plain paper	A/B format:	100 sheets (64 g/m2)
(64 - 80 g/m2)*2	A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO	100 sheets (80 g/m2)
	LT format:
THICK PAPER 1		1 sheet
	LD, LG, LT, LT-R, ST-R, COMP, 13"LG*5
(81 - 105 g/m2)*3		(81 - 105 g/m2)
THICK PAPER 2		1 sheet
(106 - 163 g/m2)*3		(106 - 163 g/m2)
Tracing paper		1 sheet
(75 g/m2)*3
Sticker labels*3		1 sheet
Transparencies*3, *4	A4 only	1 sheet

*1 “Maximum sheet capacity” refers to the maximum number of sheets when TOSHIBA-recommended paper is used. See the following page for the TOSHIBA-recommended paper:

P.40 “Recommended paper”

*2 The paper of 50 to 63 g/m2 can be used if it is set on the bypass tray one by one.

*3 Automatic duplex copying is not available.

*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.

*5 13"LG size paper can be used only in equipment for the EU.

Using Bypass Tray 63