Toshiba e-STUDIO35, e-STUDIO45 manual Automatic Paper Selection APS

Page 45

1. PAPER SELECTION

Automatic Paper Selection (APS)

When you place regular-sized originals on the glass or in the reversing automatic document feeder (optional), the built-in sensors automatically work to detect the size of the originals, helping the copier select and copy on paper that is the same size as the original. (This mode is default setting.)

*Depending on the condition of the original, automatic paper selection may not work correctly. In that case, select the paper size manually. Page 3-3

*This mode can only be used for actual-size (100%) copying.

*For automatically selectable sizes of originals Page 2-4

3

1 Confirm that the Automatic Paper Selection mode is selected on the basic screen.

2 Set the original(s). Page 2-4

If the Automatic Paper Selection mode is not selected, press the ZOOM··· key, then press the APS key on the next screen.

If the following messages are shown, proceed as you are told to:

Change direction of original

Set correct cassette

Select other copy modes as required.

3 Press the START key.

3-2

SETTING OF BASIC COPY MODES

Image 45
Contents Page Page Off Mode Default Time STUDIO45/35 Copier model Base model Off ModeAutomatic Energy Save Default Time Sleep Mode Default TimeSupplies / Parts Toshiba Quality is Second to NoneToshiba Quality is Second to None TonersGeneral Preface Preface Features of the e-STUDIO45/35Table of Contents Table of Contents Maintenance Installation PrecautionsBe sure to disconnect the power-cord plug General PrecautionsHandle and use the copier gently and carefully Machine Noise InformationForgery Prevention Function Before Making Copies Main Components Description Ofthe Digital Copier Andthe Optional EquipmentLarge-Capacity Feeder Optional EquipmentFinisher Hole Punching UnitControl Panel Interrupt key Digital keysFunction Clear key CLEAR/STOP keyTouch Panel Message AreaTouch-keys Area Confirm set functions key Clearing the Functions SelectedTotal Counter Press the JOB Status key on the control panelPress the Status key Acceptable Paper Types and Sizes/Handling and Storing Paper Copy PaperAcceptable Paper Types and Sizes Handling and Storing PaperCopy Paper Set the paper in the cassette Setting the Cassette for Special Uses12BEFORE Making Copies Turning on the Power Switch Turning on the Power Switch/Auto Job StartAuto Job Start Controlling the Use of the Copier with Department Codes Turning on the Power SwitchKey in a registered department code 5-digit After the Scanning Operation is FinishedInsert your key copy counter After Copying is FinishedFollowing message appears on the basic screen 16BEFORE Making Copies HOW to Make Copies General Copying Procedures Place the originalsSelect copy modes with x in the illustration on Press the Start key c in the illustration be- low To copy multiple original pagesTo make multiple sets of copies Originals Setting OriginalsBook-type Originals When Using the Reversing Automatic Document Feeder optional Setting OriginalsSlide Auto JOB Start Confirming and Cancelling Auto Job StartPlace the originals. Press the Start keyPress Interrupt key Interrupt CopyingPlace the original. This message appearsStopping the Copy Operation Page Deleting the Data Deleting or Changing Order of Pending JobsChanging order is completed 14HOW to Make Copies Setting of Basic Copy Modes Automatic Paper Selection APS Paper SelectionManual Paper Selection When Standard Size Paper is Set Select the paper size Paper SelectionBypass Copying Check the input size, then press the lower SET key When Non Standard Size Paper is SetReduction and Enlargement Copying Press the Start key Reduction and Enlargement Copying Selectingtypes of Copying 1-SIDED, 2-SIDED, BOOK-TYPE Selectingtypes of Copying 1-SIDED, 2-SIDED, BOOK-TYPE Press the 1n2 key Place the originals Figure on the right Press the 2n2 key On the basic screen, press the key shadedBook-Type Originals 2-Sided Copies Press the 2n1 keySelect A4 size of paper Manual paper selection Copy Density Adjustment Copy Density Adjustment Set the originals On the basic screen, press the key shaded Selecting Image Quality Types of Originals18SETTING of Basic Copy Modes Using the Editing Functions Image Shift Copying Press the Start key Providing Book-binding Margin Adjust the width of the margin, then press the SET keyEdge Erase Copying Adjust the width of the white border, then press the SET keyPress the 1 Side or 2 Side key DUAL-PAGE CopyingPress the lower SET key Y Zoom CopyingImage Editing Trimming/MaskingPlace an original on the glass to specify areas Press the lower SET key Set the originals. Imaging EditingPress the Editing Key Mirror ImagePress the Mirror key Press the Edit key to enter the editing menu. ThenPress the NEG/POS key Negative/Positive Reversal1 / 4 in 1 Copying 1 / 4 in 1 Copying Copying with Annotation Added Numbering Copying Page Adjust the binding margin and press the SET key Magazine Sort Copying from Editing MenuPress the Magazine Sort key Page Cover Sheet Copying Cassette for cover sheet Press the desired Cover Sheet keyPlace sheets of paper in the cassette for sheet in- sertion. Sheet Insertion Copying10Press the Start key Press the desired Insertion mode keyDocument Storage Tips Direction of Copy Images Rotation Repeat for the second and subsequent origi- nals Direction of Copy Images Rotation Using the Special Functions Continuous Feed Mode Press the ADF keyMaximum number of originals that can be set Original is automatically pulled in and the screen Press the Sadf keyCopying MIXED-SIZED Originals Mode Memory Copying Mode Memory Copying Confirming Stored Copy Modes Press the Thick Paper or Transparency key Copying on Special Types of PaperOutputting Transparency OHP Films on Inner Tray Set ON/OFF times for each day of the week Weekly TimerCancelling the Use of the Weekly Timer Setting the Other Paper Sizes Other KEY Check that the settings are all correct Setting the Date and TimeSetting the Clock to the Daylight Saving Time System Press the SET keySetting Automatic Energy Saving Mode Clearing the Automatic Energy Saving ModeIs activated Clearing the Automatic Shutoff Mode Setting Automatic Shutoff ModePress the key of the desired language Switching Between LanguagesDepartment Codes Clearing All Counters Department CodesPress the SET key to register a master code Department code is 5 digits 00000 is invalid Entering letters 22USING the Special Functions Page Entering Letters Entering LettersExample Correct Toshiba to Toshiba Entering Letters Selecting Finishing Modes Using the Optional FinishersFinishing Modes and Finishers Optional Names of the FinishersConsole type Hanging type SORT/GROUP Copying SORT/GROUP Copying Staple Mode Staple Mode Alternate Stacking Mode Folio Hole Punching ModeMagazine Sort & Saddle Stitching Mode Magazine Sort & Saddle Stitching Mode When Graphic Symbols Flash on the Touch Panel Description Ofthe Flashing Graphic Symbols ADD Paper Symbol Adding Paper to the CassettesPush the cassette straight in until it comes to a stop ADD Paper Symbol Adding Paper to the Large-Capacity Feeder optionalClose the cover of the large-capacity feeder Open the front cover Replace Toner Cartridge SymbolRemoving the Toner Cartridge Replace Toner Cartridge SymbolCartridge Install the new toner bag by reversing the procedure Installing a New Toner BagWhen the Replace Toner BAG Symbol flashes 11used for removing oneAdditional Explanation Clear Paper Symbol Page Clear Paper Symbol Open the cover B Remove any misfed paper Paper Misfeed in the Large-Capacity Feeder optionalPaper Misfeed in the Paper Feed Pedestal optional 14WHEN Graphic Symbols Flash on the Touch Panel Page 16WHEN Graphic Symbols Flash on the Touch Panel Paper Misfeed in the Hole Punching Unit optional When Graphic Symbols Flash on the Touch Panel Page 20WHEN Graphic Symbols Flash on the Touch Panel Adding Staples Adding Staples Replace both staple cases with new ones 24WHEN Graphic Symbols Flash on the Touch Panel Console-Type Finisher Removing Jammed StaplesSlide the staple cartridge back into the stapler Removing Jammed StaplesAttach the finisher to the copier Clearing Accumulated Punched Paper Bits Call Service Symbol Periodic Maintenance Message Maintenance Daily Inspection Main power switch ON/OFF statusCleaning the Charger Open the front cover Clean the chargerClose the front cover Display does not change when keys or icons are pressed Simple TroubleshootingCopier does not start Copy density is too lowCopy images are blurred Copies are stainedImages are partially missing Touch panel screen is not easy to see6MAINTENANCE Specifications & Options STUDIO45/35 Specifications Specification of Options Paper Feed Pedestal/Large-capacity FeederCassette Module Device An option for KD-1009 Tray Loading Capacity MJ-1012 / MJ-1013 Specification of OptionsMJ-1011 with mixed paper not loaded MJ-1011 with mixed paper loadedHole Puncher Options for MJ-1012/MJ-1013 Packing List To Service Technicians Periodic MaintenanceKanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan
Related manuals
Manual 53 pages 10.92 Kb

e-STUDIO35, e-STUDIO45 specifications

The Toshiba e-STUDIO45 and e-STUDIO35 models are multifunctional copiers designed to meet the diverse needs of businesses looking for reliable, high-quality printing, scanning, and copying solutions. These models are particularly popular in small to medium-sized enterprises due to their compact design, impressive features, and robust performance.

One of the standout features of the e-STUDIO45 and e-STUDIO35 is their printing speed. Both models offer efficient print speeds of up to 45 pages per minute for the e-STUDIO45 and up to 35 pages per minute for the e-STUDIO35, allowing businesses to handle high-volume printing tasks with ease. This feature is complemented by a quick first-copy-out time, ensuring minimal downtime between jobs.

The e-STUDIO series is equipped with advanced imaging technologies that deliver exceptional print quality. With a resolution of up to 1200 x 1200 dpi, users can expect sharp text and vibrant images, making these devices suitable for professional-grade documents. Additionally, the long-life developer and durable drum lower the maintenance frequency, contributing to lower total cost of ownership.

Another significant advantage of these models is their versatility in handling various media sizes and types. They support an array of paper sizes, from A6 to A3, and can handle various weights, making them suitable for diverse applications, including brochures, flyers, and reports.

The Toshiba e-STUDIO45 and e-STUDIO35 also incorporate advanced scanning features that enhance productivity. With a high-speed document feeder, these devices can scan double-sided documents in one pass, significantly speeding up the digitization process. The integrated scanning capabilities support formats such as PDF, TIFF, and JPEG, and allow for scanning directly to email, USB, or network folders.

User convenience is further enhanced by the intuitive touchscreen interface, which simplifies navigation and operation. The customizable home screen allows users to set up shortcuts for frequently used functions, streamlining the workflow. Additionally, both models support mobile printing capabilities, enabling users to print directly from smartphones and tablets, enhancing accessibility in today's digital workplace.

Security is also a top priority for Toshiba, and these models come equipped with various security features. They include secure printing options, user authentication protocols, and data encryption to ensure sensitive information is protected.

Overall, the Toshiba e-STUDIO45 and e-STUDIO35 are well-rounded multifunctional devices that combine speed, quality, and versatility. Their robust feature set and user-friendly design make them an excellent choice for businesses looking to enhance their productivity while maintaining high standards of quality and security in their printing and imaging tasks.