Toshiba installation instructions Technical Support, SD-M1201 Specifications DVD CD-ROM

Page 8

TECHNICAL SUPPORT

Technical support can be obtained by calling 949/455-0407. Drivers are available on BBS at 949/837-8864 or on our web site at

http://www.toshiba.com

SD-M1201 SPECIFICATIONS

DVD

CD-ROM

Data Capacity (bytes/block)

2,048

mode 1

 

mode 2

 

 

 

 

 

 

 

 

 

 

2,048

 

2,336

 

 

 

 

 

 

 

Rotational Speed (approx. rpm)

2,900

13.8 ~ 32X: 6,900

 

 

 

 

 

8.6 ~ 20X: 4,300 (CD-RW)

 

 

 

4 ~ 5.7X: 1,200-2,000 (audio)

 

 

 

 

 

 

 

Sustained Data Transfer Rate

2,797 ~

mode 1

 

mode 2

(kbytes/sec)

6,760

2,069 ~

 

2,360 ~

 

 

 

4,800

 

5,475

 

 

 

 

 

 

 

Access Time (Typ.)

 

 

 

 

 

Avg. Random Access

135ms

95ms

 

 

Avg. Random Seek

105ms

90ms

 

 

Avg. Full Stroke Access

230ms

160ms

 

 

Data Buffer

 

256 kbytes

 

 

 

 

 

 

 

 

Power Supply

 

+5V, +12V

 

 

Dimensions

146mm x 41.5mm x 193mm (W x H x D)

 

 

 

 

 

 

Weight

 

0.98kg

 

 

 

 

 

 

 

 

MTBF

 

100,000 hours

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FCC DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged

to

try to correct the interference by one or more of the following measures:

Re-orient

or relocate the receiving antenna.

Increase

the

separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user's authority to operate this equipment.

LASER CAUTION

This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read this Owner's Manual carefully and keep this manual for future reference. In case of any trouble with this model, please contact your nearest "Authorized Repair Center." To prevent direct exposure to the laser beam, do not try to open the enclosure.

460015-a0

P/N 460015-A0

8

Image 8
Contents Checking Your KIT Packaging System RequirementSetting Jumpers Connecting Cables Placing DVD-ROM Inside Your ComputerPage SD-M1201 Connection ONE Drive Completing Installation DVD-ROM Front PanelDVD-ROM Back Panel SD-M1201 Specifications DVD CD-ROM Technical Support