| Getting started |
| |
| Remove your Television carefully | Please Note | |
| from the box. You may wish to | When not in use disconnect the plug | |
| store the packaging for future use. | from the mains power supply. | |
|
| 4. Press the Power button on | |
|
|
| |
| In the box |
| the front of the TV. The |
|
| standby indicator will | |
| Inside the cartoon box you should have: | 7 | illuminate. |
| • Accessories box | 5. Press a Numeric button or the | |
| • Power cord |
| Program up or Program down |
| • Adapter |
| button on the remote handset or |
| • Remote control |
| |
|
| Program up, Program down | |
| • Batteries |
| |
|
| or MENU button on the front panel to | |
4 |
|
| |
Read these instructions before use. |
| switch the TV on. | |
| Aerial connection |
| The standby indicator remains on. |
|
| The picture will appear after a | |
| To connect an aerial, plug the aerial lead |
| few seconds. |
| into the aerial socket on the rear of the |
|
|
| TV. |
| Press the Standby button to switch |
|
|
| the TV to standby. The standby |
|
|
| indicator will brighter. |
Please Note
Do not leave the television on standby unattended or overnight.
Switching the TV on for the first time
To install your TV, please read the sections “TV controls” and “ Tuning the television”.
Battery fitting
Insert the 2 AAA Batteries supplied into the compartment on the rear of the remote control, ensure you follow the polarity
If you live in a poor reception area or use andiagram inside the compartment. indoor aerial you may experience loss or
corruption of teletext transmissions.
Switching on and First Use
1.Connect the power cord to the mains plug.
2.Connect the input socket of the adapter to the
12V DC socket at the back panel of the LCD TV.
3.Connect adapter to the mains plug.
Note 1: Your TV will move to
in five minutes when there is no broadcast signal. Note 2: Your TV is equipned to operate with front panel buttons, “MENU”, “PR+”,