Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched off.
Plug one end of the SCART lead (not supplied) into the back of the decoder and the other end into the SCART
on the back of the TV.
Switch on the decoder and the TV.
Plug one end of the RCA lead into the video and audio out sockets on the back of the decoder and plug the other end into the video and audio in sockets on the TV.
Press the AVbutton on the remote
AV | control to select AV1. |
|
21
Via RCA lead
Make sure the TV and decoder are both switched off.
Note: For Decoder connection Via RCA lead your Decoder device should have the tuner built in.
| VGA |
| DC 12V |
AVS | |
| VIDEO |
AV3 | R |
| L |
OUT | R |
AUDIO | L |