Press the Mute button again to restore the sound. The symbol will disappear.
Pressing Volume up buttons will also restore the sound. But pressing the Volume down button will decrease the volume
PPwithout restoring.
Tuning the television
There are two ways of tuning your television: Manual, where you control the tuning process or
Autoprogram where the television does it all automatically.
Your TV will sort all the channels with the ATS. Sorting will be performed in the
PP
Swap
SWAP
8
Personal preference. Press the
PPbutton to revert to the default settings for the TV. (See TV setup).
Select the programme you would like to recall by pressing SWAP button. Selected programme number will appear on the lower left side of the screen. While watching any programme, you can recall the selected one by pressing SWAP button again.
If you press swap button again you can recall the last programme you watched. You can cancel SWAP function by pressing MENU button.
following order:
a- Selected country’s channels with teletext and channel names.
b- Selected country’s channels with teletext and without channel names.
c- Selected country’s channels without teletext.
d- Foreign channels with teletext and channel names.
Please Note
If the TV is set to a channel with no signal the TV will return to standby in 5 minutes.
The last minute remaining is displayed on the screen.
PR 01 
SWAP
PR 11 
PR 12 
PR 13...
SWAP
PR 01 Automatic tuning (Autoprogram)
AV
Your TV has 1 scart so every time AV you press your AV button, your input
will change as follows:
1 AV1 when using SCART socket 1 (RGB support).
2 AV2 when using RCA socket.
3 AVS when using the
Press the AVbutton again to
AV | return to TV. |
|
There are two ways to access the SETUP menu:
| Press the blue Setup button. |
MENU | or |
Press the Menu button and use the |
Program down button to select SETUP. Press theOK button to
OK enter the SETUP menu.
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURE
SETUP |
CHANNEL |
SYSTEM |
SEARCH |
FINE TUNE |
PROGRAM NUMBER |
AUTO PROGRAM |
STORE |