Toshiba EN-2 Using the dynadock, USB 2.0 Ports Front and Back Panel, Ethernet Port Back Panel

Page 27

Using the dynadock™

Using the dynadock™

You may connect devices to the appropriate ports on the dynadock while your computer is running. A slight delay and display flickering is normal before the computer recognizes the new device. Please be patient.

USB 2.0 Ports (Front and Back Panel)

Connect any USB device to one of the dynadock’s six USB ports.

■When no device is connected to the port, the indicator light is off.

■If a device is connected to the port and the connection works properly, the indicator light glows green (on).

■If your USB device, such as a printer or optical drive, etc., came with its own AC adaptor, make sure that it is plugged into the device and a live electrical outlet.

NOTE: Only the front two USB ports provide power when the computer is either off, suspended or disconnected.

Ethernet Port (Back Panel)

Connect one end of a network cable (not provided) to the Ethernet port (RJ-45) on the dynadock and the other end to your network for high performance network access. To configure the network properties of the Ethernet adapter:

In Windows Vista®, select Start > Control Panel > View network status and tasks > Manage network connections.

In Windows® XP, select Start > Settings > Network Connections.

In the Network Connections folder, double-click the connection icon for the dynadock’s Ethernet adapter, which is indicated by ASIX AX88772 USB2.0 to Fast Ethernet Adapter.

(Sample Image) Network Connection icon

User’s Manual

EN-27

Image 27

Contents User’s Manual Contents FCC Conditions Regulatory ComplianceFCC Information FCC notice Declaration of Conformity InformationSafety Instructions EU Declaration of ConformityWeee Information Trademarks PrecautionsCopyright Statement DisclaimerPrecautions for Windows Vista only Introduction Front panel FeaturesBack panel System Requirements Package contentsAssembly Sample Illustration The assembled dynadock Installing the Drivers InstallationSelect I Agree and click Next Sample Image Ready to Install screen Windows Vista Operations Click Finish when the dialog box shown below appears Windows XP Operations Install drivers Background Utility Program Connecting the dynadock to the Computer EN-22 User’s Manual Uninstalling Uninstalling Windows Vista OperationsUninstalling the Utility Uninstalling the Video Driver Uninstall the Audio Driver Uninstalling Windows XP OperationsSample Illustration Remove Toshiba Video Dock Ethernet Port Back Panel Using the dynadockWindows XP, select Start Settings Network Connections USB 2.0 Ports Front and Back PanelSerial Port Back Panel Front Panel Audio Port Microphone Front Panel Audio Port Headphones or SpeakersUsing the Virtual Speaker Shifter Controls Using the Basic Controls Digital S/PDIF Output Back panel Connection Video Port VGA or DVIMirror Mode Viewable screensVideo Modes Extended Mode Check the Extend the desktop onto this monitor boxCheck the Extend my windows desktop onto this monitor box Switching from Extended Mode to Mirror Mode Uncheck the Extend the desktop onto this monitor boxUncheck the Extend my windows desktop onto this monitor box Adjusting Video Settings Initial Use Adjusting the Video Settings Windows Vista OperationsAdjusting the Video Settings Windows XP Operations External MonitorsOther Devices Eject Dock Disconnecting the dynadockEject Dock and Sleep Eject by use of command line Removing SettingsOpening Setting Dialog Setting Sleep Service Uncheck Show unexpected remove message box Setting Message Notify ServiceSelect Audio Device Specifications Physical DimensionsEnvironmental Requirements General Specifications Dynadock EN-48 User’s Manual