Introduction
Back panel
Optical S/PDIF digital out port: Use an optical S/PDIF cable (not provided) to connect to your
digital audio equipment, e.g., Dolby® Digital Surround Sound receiver and speaker system To use this connection, your receiver must have an optical S/PDIF input.
DB9 Serial port: For connection to the serial device you want to control.
4 USB 2.0 ports (A type female connector): For connection to USB peripherals.
10/100 Mbps Ethernet port: For connection to the Ethernet network via a network cable (not provided).
Cable holder holes: Allows you to hook the cable
holder once all of your devices are attached.
DVI video output port: For connection to a DVI monitor (shown).
- or -
VGA video output port: For connection to a VGA monitor (not shown).
USB port: For connection to the USB port of the host computer.
Cable Lock Slot: Allows you to connect a cable lock to help prevent theft (not provided).
Power jack: For connection to the provided AC adaptor. The dynadock always needs an external power supply for operation, as it does not take power from the USB bus.
(Sample Illustration) Connections on the back of the dynadock
User’s Manual |