1 | cutouts (2) | 2 | memory module |
|
|
|
|
3 | notch | 4 | tab on the memory module connector |
|
|
|
|
CAUTION: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module.
8.Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
9.Replace the computer cover (see Replacing the Computer Cover).
10.Connect your computer and devices to electrical outlets, and then turn them on.
11.If a message appears stating that memory size has changed, press <F1> to continue.
12.Log on to your computer.
13.
14.Click the General tab.
15.To verify that the memory is installed correctly, check the amount of memory (RAM) listed.