Dell 3800 owner manual Removing The Cover, Installing The Cover, Removing The Bezel

Page 9

3.

system board

4.

optical drive

5.

I/O panel

6.

system fan

7.

hard drive

8.

coin-cell battery

9.

power supply unit (PSU)

10.

expansion card

Removing The Cover

1.Follow the procedures in Before Working Inside Your Computer.

2.Follow the steps below to remove the cover:

a.Remove the screws that secure the cover to the computer.

b.Lift and remove the cover from the computer.

Installing The Cover

1.Place the cover on the chassis.

2.Replace the screws to secure the cover to the computer.

3.Follow the procedures in After Working Inside Your Computer.

Removing The Bezel

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the cover.

9

Image 9
Contents Dell Vostro Page Contents Specifications Contacting Dell Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your Computer Removing and Installing Components Recommended ToolsSystem Overview Installing The Cover Removing The CoverRemoving The Bezel Removing The Optical Drive Installing The BezelRemoving The Hard Drive Installing The Optical DriveInstalling The Hard Drive Installing the Expansion Cards Removing The Power Supply Unit PSURemoving the Expansion Cards Page Removing The Heatsink Installing The Power Supply Unit PSUInstalling the Processor Installing The HeatsinkRemoving the Processor Removing the MemoryRemoving The System Fan Installing the MemoryRemoving The Input/Output I/O Panel Installing The System FanInstalling The Input/Output I/O Panel Removing The System Board System Board Components Installing The System BoardPage Diagnostic Power LED Codes Troubleshooting Your ComputerDiagnostic Error Messages Insert Bootable Media HARD-DISK Drive Configuration ErrorInvalid Configuration INFORMATION-PLEASE RUN System Setup ProgramMemory Allocation Error Licensed Content is not Accessible in MediadirectNo Boot Device Available No Boot Sector on Hard DriveTIME-OF-DAY Clock Lost Power Seek Error\ is not ACCESSIBLE. the Device is not Ready Not Enough Memory or RESOURCES. ExitSystem Error Messages System Setup Overview System SetupEnter System Setup System Setup OptionsSata AdvancedBoot Wlan PowerSpecifications PCI USBVAC-264 VAC Page Contacting Dell