1.Follow the procedures in "Before You Begin."
2.Remove the computer cover.
3.Press out the securing clip at each end of the memory module connector.
4.Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and forth to remove it from the connector.
Installing Memory
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1.Follow the procedures in "Before You Begin."
2.Remove the computer cover.
3.Press out the securing clip at each end of the memory module connector.
1 
memory connector closest to processor 
2 
securing clips (2)
3 
memory connector
4. Align the notch on the bottom of the module with the crossbar in the connector.