Dell D01T owner manual Installing the Hard Drive, Removing the Thermal Sensor

5.Slide the hard drive out of the compartment.

6.If a 2.5–inch hard drive is installed, remove the screws and lift up the drive to remove it from the hard-drive caddy.

Installing the Hard Drive

1.If a 2.5–inch hard drive is installed on the computer, place the hard drive on the hard-drive caddy and tighten the screws to secure the hard drive.

2.Press in on the latches of the hard-drive cage and slide it inside the compartment.

3.Connect the hard-drive power supply cable.

4.Connect the hard-drive data cable.

5.Install the cover.

6.Follow the procedures in After Working Inside Your Computer.

Removing the Thermal Sensor

NOTE: The thermal sensor is an optional component and your computer may not ship with it.

1.Follow the procedures in Before Working On Your Computer.

2.Remove the cover.

18