A possible graphics card failure has occurred.
A possible hard drive failure has occurred.
A possible USB failure has occurred
No memory modules are detected.
•If available, install verified working memory of the same type into your computer.
•Ensure that the display/monitor is plugged into a discrete graphic card.
•
•If available, install a working graphics card into your computer.
•Re-seat all power and data cables.
•Reinstall all USB devices and check all cable connections.
•If two or more memory modules are installed, remove the modules, then reinstall one module and restart the computer. If the computer starts normally, continue to install additional memory modules (one at a time) until you have identified a faulty module or reinstalled all modules without error.
•If available, install working memory of the same type into your computer.
Power connector not installed properly.
Memory modules are detected, but a memory configuration or compatibility error has occurred.
•
•Ensure that no special requirements for memory module/ connector placement exist.
•Ensure that the memory you are using is supported by your computer.
A possible system board resource and/or hardware failure has occurred.
•Clear CMOS
•Disconnect all internal and external peripherals, and restart the computer. If the computer boots, add the peripheral cards back one by one until you find the bad one.
•If the problem persists, the system board / system board component is faulty.
60