Dell D01T Option Description, Default Setting All drives are enabled, Smart Reporting, Audio

Option Description

•SATA2–HDD2

•SATA2–ODD0

•SATA3–HDD1

•SATA2–HDD3

•SATA2–ODD1

Default Setting: All drives are enabled.

NOTE: If the hard drives are connected to a RAID controller card, the hard drives will display {none} in all the fields. The hard drives can be seen in the RAID controller card BIOS.

• T7610	•	SATA2–ODD0
	•	SATA2–ODD1
	Default Setting: All drives are enabled.
		NOTE: If the hard drives are connected to a RAID controller card,
		the hard drives will display {none} in all the fields. The hard drives
		can be seen in the RAID controller card BIOS.
SMART Reporting	This field controls if the hard drive errors for the integrated drives are
	reported during system startup. This technology is part of the SMART
	(Self Monitoring Analysis and Reporting Technology) specification.
	• Enable SMART Reporting - This option is disabled by default.
USB Configuration	Allows you to enable or disable the internal USB configuration. The
	options are:
	•	Enable Boot Support
	•	Front USB Ports
	• Back Quad USB Ports
	• Enable internal USB ports
	•	USB3 Ports
PCI Bus Configuration	Allows you to configure the PCI buses. The options are:
	• 256 PCI Buses (Default)
	•	128 PCI Buses
	•	64 PCI Buses
Memory Map IO above 4GB	Allows you enable or disable Memory Map IO above 4GB.
	• Memory Map IO above 4GB - This option is disabled by default.
Optional HDD Fans	Allows you to control the HDD fans.
	Default Setting: depends on the system configuration
Audio	Allows you enable or disable the audio feature.
	Default Setting: Audio is enabled
SAS RAID Controller (T7610 only)	Allows you to control the operation of the integrated SAS RAID HDD
	controller.

48