Title: Engineering Product Specification Telecom Circuit Protector | Revision: L |
|
| |
Printed on: 7/14/2003 |
| Sheet 15 | of | 18 |
|
|
|
| |
11. PACKAGING SPECIFICATION |
|
|
| |
11.1 SP1/: | 10 pieces of fuses on 24mm tape, 8 mm pitch per EIA Standard 481, packaged in a | |||
| plastic bag |
|
|
|
11.2 SP2/: | 50 pieces of fuses on 24mm tape, 8 mm pitch per EIA Standard 481, packaged in a | |||
| plastic box |
|
|
|
11.3 TR1/: | 1000 pieces of fuses on 24mm tape and reeled on a 13 inch (330 mm) reel per EIA | |||
| Standard 481, 8 mm pitch |
|
|
|
11.4 TR2/: | 2500 pieces of fuses on 24mm tape and reeled on a 13 inch (330 mm) reel per EIA | |||
| Standard 481, 8 mm pitch |
|
|
|
12. PROCESS FLOW CHART
Purchase |
|
| Purchase Ceramic | ||
Wire (T) |
|
| Yarn (T) | ||
|
|
|
|
|
|
|
|
|
|
|
|
Purchase
Tubes
Metallize
Tube Ends
Plate
Metalized
Ends’
Purchase
End Plates
Clean End Plates
Plate
Wire (T)
Wind Wire
Around Yarn (T)
Cut Element To Length
Assemble Fuse Components
and Reflow Solder
Overcoat
Terminations
Test
and Pack Fuses
Purchase
Solder Disk
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.