APC PMJ3XS-B, PMP3XS-B, PMH3XS-B, PML3XS-B Hazard of Electric SHOCK, EXPLOSION, or ARC Flash

Page 7

Introduction

NOTE: Type 2 SPDs are designed for use on the load side of the service entrance Overcurrent Protection Device (OCPD) only.

NOTE: For troubleshooting, call APC Technical Support at 1-800-800-4272.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

•Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E.

•This equipment must only be installed and serviced by qualified electrical personnel.

•Turn off all power supplying this equipment before working on or inside equipment.

•Always use a properly rated voltage sensing device to confirm power is off.

•Replace all devices, doors and covers before turning on power to this equipment.

•This equipment must be effectively grounded per all applicable codes. Use an equipment-grounding conductor to connect this equipment to the power system ground.

Failure to follow these instructions will result in death or serious injury.

Proper installation is imperative to maximize the modular Surge Protective Device’s (SPD’s) effectiveness and performance. The installer should follow the steps outlined in this instruction bulletin to ensure proper installation. Read the entire instruction bulletin before beginning the installation. These instructions are not intended to replace national or local electrical codes. Check all applicable electrical codes to verify compliance. Installation of modular surge suppressors should only be performed by qualified electrical personnel.

Installation and Operation Manual

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PMF3XS-B PMJ3XS-B PMP3XS-B PMH3XS-B PMG3XS-B PML3XS-B InstallationPage Table of Contents Hazard of Electric SHOCK, EXPLOSION, or ARC Flash PrecautionsPrecautions Loss of Branch Circuit POWER/LOSS of Surge SuppressionLoss of Surge Suppression Introduction TestingIntroduction Hazard of Electric SHOCK, EXPLOSION, or ARC Flash SPD Nameplate Example InspectionVoltage Ratings ElectricalElectrical Voltage RatingBranch Circuit Overcurrent Protection and Disconnect Means Terminals, Wire Size, and Installation TorqueLocation of SPD LocationGrounding GroundingHazardous Touch Voltage Installation InstallationCables are removed, reconnect the cables as marked Wiring WiringSIngle-Phase, Three-Wire, Grounded Installation Wiring Diagrams without Integral SwitchOperation LED Status IndicatorsOperation SurgeArrest Replacement Modules Audible Alarm Surge CounterDry Contacts Dry Contact ConfigurationPreventive Maintenance MaintenanceTroubleshooting Flowchart TroubleshootingTroubleshooting Replacement PartsPage Page Page APC Worldwide Customer Support

PML3XS-B, PMJ3XS-B, PMH3XS-B, PMF3XS-B, PMP3XS-B specifications

The APC PMG3XS-B, PMJ3XS-B, PMH3XS-B, PML3XS-B, and PMF3XS-B are part of APC’s renowned line of power management solutions, designed to provide effective power protection and management for sensitive electronic equipment. Each model in this series offers unique features tailored to different application needs, yet they all share a commitment to the core standards of reliability, efficiency, and user-friendliness.

Starting with the PMG3XS-B, this model is equipped with advanced power conditioning technology, ensuring that connected devices receive a clean and stable power supply. Its compact design allows for easy installation in various environments, making it suitable for both home and office use. Featuring an LCD display, users can monitor the device's performance in real-time, providing insights into power usage and status alerts.

The PMJ3XS-B is designed with enhanced surge protection capabilities, safeguarding electronics from sudden voltage spikes. It features a robust build quality that ensures durability and longevity, making it an ideal choice for users needing reliable equipment for critical operations. Its smart charging capability optimizes power usage while maintaining the health of connected devices.

The PMH3XS-B emphasizes high-efficiency power management, with energy-saving features that reduce unnecessary power consumption. This model supports multiple output configurations, accommodating various plug types and ensuring versatility in managing different devices. It's particularly beneficial for businesses aiming to minimize energy costs while sustaining performance.

For users seeking a lightweight and portable solution, the PML3XS-B stands out. Perfect for on-the-go professionals, this model offers a slim design without compromising essential power management features. Its compatibility with various devices makes it a favorite for users who require power solutions across different locations.

Lastly, the PMF3XS-B combines all the strengths of its counterparts, focusing on advanced filtering technology to eliminate power line noise. This feature is crucial for sensitive equipment, ensuring optimal performance and longevity. With its comprehensive monitoring capabilities, users can easily assess power quality and make informed decisions about their energy usage.

In summary, the APC PMG3XS-B, PMJ3XS-B, PMH3XS-B, PML3XS-B, and PMF3XS-B provide a comprehensive suite of power management options designed for diverse applications. Their commitment to performance, efficiency, and user convenience makes them an exceptional choice for anyone looking to protect their electronic devices effectively.
Top Page Image Contents