ETA-ECM2063

AC Power Distribution Sequencer

WARNING – WHEN THE DEVICE IS IN USE

•To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to

ETA Systems.

•Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the

AC outlet and contact ETA Systems. Do not to attempt to continue operation with the product as this may cause fire or electric shock:

•Smoke or strange smell coming from the unit.

•If the product falls or the case is damaged.

•If water or any metallic objects falls into the product.

•If the power supply cord is damaged in any way.

•If the unit is malfunctioning.

•Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product’s cover, as this may result in electric shock or fire.

•Do not place any containers with liquid or metallic objects on the top of the product. If any liquid spills into the unit, fire or electric shock may result.

•Never operate this product or touch the power supply cord during an electrical storm, electric shock may result.

•Never exceed the power rating on the product when connecting equipment. Fire and/or property damage may result.

•Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.

•Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy objects on the power cord, including the product itself, doing so may result in fire or electrical shock.

•Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic disaster may result.

•Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.

CAUTION – WHEN INSTALLING THE PRODUCT

•Plugging in or unplugging the power cord with wet hands may result in electric shock.

•Never move the unit with the power cord plugged into the wall, as damage to the power cord may result.

•When unplugging the cord from the wall, grasp the plug, NOT the cord.

•Never install this product in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or steam are present. Fire and electric shock may result.

•Keep all sides of the unit at least 31⁄2" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.

•Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and property damage. In addition, the product itself may fall and cause injury and property damage.

•Contact ETA Systems for instructions on cleaning the inside of the unit. Large accumulations of dust inside the unit may result in heat buildup and fire.

•Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate on the power plug or inside the wall outlet.

•When cleaning the unit or the unit is not to be operated for an extended period, unplug the power cord from the wall.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 4 –

ETAsys.com

Specifications are subject to change without notice.

eta-ecm2063 specifications

The ETA Systems ETA-ECM2063 is a cutting-edge electronic control module designed for advanced automotive applications. Known for its robust performance and user-friendly features, the ECM2063 is an essential component for modern vehicles and is widely utilized in various automotive systems today.

One of the standout features of the ETA-ECM2063 is its compatibility with a wide range of vehicle platforms. This flexibility allows automotive engineers to incorporate the module into various models and configurations seamlessly. Moreover, it supports both gasoline and diesel engines, making it versatile across different fuel types.

The ECM2063 boasts advanced processing capabilities, equipped with a powerful microcontroller that allows for real-time data processing and control. This high processing power enables the module to manage complex algorithms for fuel injection, ignition timing, and other critical engine parameters, ensuring optimal performance and efficiency.

Another key technology integrated into the ETA-ECM2063 is its scalability. The module is designed to accommodate future software updates and hardware enhancements, providing a long-lasting solution that can adapt to evolving automotive technologies. This means that manufacturers can implement innovations over time without the need to replace the entire system.

Safety is paramount in any automotive application, and the ETA-ECM2063 excels in this area. It incorporates fail-safe mechanisms and diagnostic capabilities, allowing for continuous monitoring of system performance. The module can detect anomalies, troubleshoot issues, and communicate necessary information to technicians for timely repairs, thus enhancing overall vehicle safety.

The robust construction of the ECM2063 makes it resistant to harsh automotive environments, including extreme temperatures, humidity, and vibrations. This durability ensures that the module consistently performs well under varying conditions, contributing to vehicle reliability.

In summary, the ETA Systems ETA-ECM2063 combines flexibility, advanced processing power, scalability, safety features, and durability into a single automotive solution. Its capability to efficiently manage engine functions while adapting to future technology makes it an invaluable tool for both manufacturers and end-users, setting a high standard in electronic control modules for automotive applications.