Introduction, KEY Features, Applications

ETA-ECM2063

AC Power Distribution Sequencer

INTRODUCTION

Thank you for purchasing the ETA Systems ETA-ECM2063 AC Power Distribution Sequencer Raceway System. The ETA-ECM2063 is designed to offer the installer/contractor current requirement flexibility based on the needs of the equipment that will be connected to the raceway. The ETA-ECM2063 accepts up to three separate 20A 120VAC lines, allowing for up to a total of 60A to be divided throughout the system. The ETA-ECM2063 features 6 individual AC 120V outlet sections that can be activated individually or in a sequenced order. Triggering a section or sequential order can be accomplished via a remote switch or by using a sequence controller like the ETA Systems ETA-SEQ6 or ETA-ECS6RM.

The ETA-ECM2063 features a total of 12, 120VAC outlets that are divided into 6 sections. Each section has an activation control port and a bi-color LED. This LED will display green to indicate that AC voltage is present at that specific AC section when it is activated or triggered and the LED will display red to indicate that the section is in Stand-By mode.

Activation has been made easy, simply short the two pins of the control port for the specific channel you want triggered ON. This can be accomplished within a few feet of the ETA-ECM2063 or from several feet away by using an ETA Systems sequence controller or via a switch.

The ETA-ECM2063 was designed to be compact measuring only 37" high, 3.5" wide and 2.75" deep. The ETA-ECM2063 can be mounted into most racks that have 48" internal height. The raceway can be mounted using the raceway mounting tabs which are designed to breakaway if needed to fit into tighter areas making it adaptable to secure the raceway in most applications. For your convenience there are six 1⁄2" & 3⁄4" dual knockouts that support standard electrical conduit components for wiring 120VAC mains into the raceway housing from the electrical panel. Note: For your safety all electrical wiring must be done by a qualified electrician.

KEY FEATURES

•Compact design 37"H x 3.5"W x 2.75"D

•6 Separate 120V Outlet Sections

•12, 120VAC 20A Outlets

•Accepts up to 3 20A 120VAC Lines, Configurable

•Incoming AC present LED

•Active LED

•Remote or Local Activation

•Hard Switch Contact Closure Trigger

•6 Dual Knockouts 1⁄2" & 3⁄4"

•4 Rail Mounting Tabs

APPLICATIONS

The ETA Systems ETA-ECM2063 was designed to be flexible, incorporating features that allow it to be used in a variety of applications. The sequenced outputs allow equipment to be turned ON or OFF in a particular order. This prevents an in-rush of current that could potentially damage connected electronics and eliminates audible pops that often occur with non-sequenced power activation. The following are just a few examples of applications in which the ETA Systems ETA-ECM2063 can be used:

•Restaurants

•Houses of Worship

•Schools

•Home Theaters

•Office Buildings

•Sports Bars

•Industrial Facilities

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 5 –

ETAsys.com

Specifications are subject to change without notice.

eta-ecm2063 specifications

The ETA Systems ETA-ECM2063 is a cutting-edge electronic control module designed for advanced automotive applications. Known for its robust performance and user-friendly features, the ECM2063 is an essential component for modern vehicles and is widely utilized in various automotive systems today.

One of the standout features of the ETA-ECM2063 is its compatibility with a wide range of vehicle platforms. This flexibility allows automotive engineers to incorporate the module into various models and configurations seamlessly. Moreover, it supports both gasoline and diesel engines, making it versatile across different fuel types.

The ECM2063 boasts advanced processing capabilities, equipped with a powerful microcontroller that allows for real-time data processing and control. This high processing power enables the module to manage complex algorithms for fuel injection, ignition timing, and other critical engine parameters, ensuring optimal performance and efficiency.

Another key technology integrated into the ETA-ECM2063 is its scalability. The module is designed to accommodate future software updates and hardware enhancements, providing a long-lasting solution that can adapt to evolving automotive technologies. This means that manufacturers can implement innovations over time without the need to replace the entire system.

Safety is paramount in any automotive application, and the ETA-ECM2063 excels in this area. It incorporates fail-safe mechanisms and diagnostic capabilities, allowing for continuous monitoring of system performance. The module can detect anomalies, troubleshoot issues, and communicate necessary information to technicians for timely repairs, thus enhancing overall vehicle safety.

The robust construction of the ECM2063 makes it resistant to harsh automotive environments, including extreme temperatures, humidity, and vibrations. This durability ensures that the module consistently performs well under varying conditions, contributing to vehicle reliability.

In summary, the ETA Systems ETA-ECM2063 combines flexibility, advanced processing power, scalability, safety features, and durability into a single automotive solution. Its capability to efficiently manage engine functions while adapting to future technology makes it an invaluable tool for both manufacturers and end-users, setting a high standard in electronic control modules for automotive applications.