Configuring the ETA-ECM2063

ETA-ECM2063

AC Power Distribution Sequencer

The ETA-ECM2063 is designed to be activated/triggered by a sequence controller like the ETA Systems ETA-SEQ6 or the ETA-ECS6RM. The ETA-ECM2063 can be configured to accept from 1 to 3 separate hard wired 20A circuits. There are three individual load sections in the ETA-ECM2063. Each load section has two separate sequence channels, with each channel having two 20A, 120VAC outlets. In summary, the ETA-ECM2063 has a total of 12 AC outlets divided into 6 sequenced channels that can be divided or combined into 3 20A circuits. Note: All electrical wiring must be done by a certified electrician.

Channel Control Ports

There are 6 channel control ports that correspond with the 6 AC outlet channels. Activation or triggering a channel of the ETA-ECM2063 is done by shorting two of the channel control port pins together. An activation sequence can be triggered using an ETA-SEQ6 or ETA-ECS6RM sequence controller or by using another external device such as a hard contact switch to trigger a channel. If a section is required to be “always ON”, connect a jumper between the control port pins to the corresponding channel.

Channel Status Indicators

Each channel has a bi-color LED that designates the status of that specific channel.

•No LED illuminated indicates there is no AC Mains power present at that channel.

•Red illumination indicates there is AC Mains power present and that channel is ready to be activated.

•Green illumination indicates the corresponding AC output channel is active and 120VAC is present.

Load Distribution

There are four different load distribution combinations for the ETA-ECM2063. The ETA-ECM2063 has 6 channels that are divided into three load circuits. This is to allow up to three separate 20A 120VAC mains lines to be applied to the ETA-ECM2063. It is not required to apply three circuits; you can parallel a single 20A line to all three load sections.

•Channels 1 & 2 are connected to L1

•Channels 3 & 4 are connected to L2

•Channels 5 & 6 are connected to L3

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 7 –

ETAsys.com

Specifications are subject to change without notice.

eta-ecm2063 specifications

The ETA Systems ETA-ECM2063 is a cutting-edge electronic control module designed for advanced automotive applications. Known for its robust performance and user-friendly features, the ECM2063 is an essential component for modern vehicles and is widely utilized in various automotive systems today.

One of the standout features of the ETA-ECM2063 is its compatibility with a wide range of vehicle platforms. This flexibility allows automotive engineers to incorporate the module into various models and configurations seamlessly. Moreover, it supports both gasoline and diesel engines, making it versatile across different fuel types.

The ECM2063 boasts advanced processing capabilities, equipped with a powerful microcontroller that allows for real-time data processing and control. This high processing power enables the module to manage complex algorithms for fuel injection, ignition timing, and other critical engine parameters, ensuring optimal performance and efficiency.

Another key technology integrated into the ETA-ECM2063 is its scalability. The module is designed to accommodate future software updates and hardware enhancements, providing a long-lasting solution that can adapt to evolving automotive technologies. This means that manufacturers can implement innovations over time without the need to replace the entire system.

Safety is paramount in any automotive application, and the ETA-ECM2063 excels in this area. It incorporates fail-safe mechanisms and diagnostic capabilities, allowing for continuous monitoring of system performance. The module can detect anomalies, troubleshoot issues, and communicate necessary information to technicians for timely repairs, thus enhancing overall vehicle safety.

The robust construction of the ECM2063 makes it resistant to harsh automotive environments, including extreme temperatures, humidity, and vibrations. This durability ensures that the module consistently performs well under varying conditions, contributing to vehicle reliability.

In summary, the ETA Systems ETA-ECM2063 combines flexibility, advanced processing power, scalability, safety features, and durability into a single automotive solution. Its capability to efficiently manage engine functions while adapting to future technology makes it an invaluable tool for both manufacturers and end-users, setting a high standard in electronic control modules for automotive applications.