Introduction, KEY Features, Applications

ETA-ECM30

30A AC Power Module Spike Suppressor

INTRODUCTION

Thank you for purchasing the ETA Systems ETA-ECM30 AC Power Module Spike Suppressor Unit. Note: For your safety, all electrical wiring should be done by a qualified electrician.

The ETA Systems ETA-ECM30 is an Electrical Control Module (ECM) 30A AC Spike Suppressor that is designed to be used as a stand-alone unit or in conjunction with an ETA-ECS6RM Controller up to 1000ft away. AC Spikes, or transients, are commonly caused by utility power plant grid switchovers. The amount of energy that can be injected into the power system can be immense with voltages reaching 6kV or current peaks of 3000A. These spikes are very fast and usually only last for a very short period of time. To protect against this potential problem, incoming AC Mains have special suppression circuitry to eliminate the unwanted energy. The ETA-ECM30 circuitry is very fast and can suppress unwanted energy within a nanosecond, while sustaining the suppression for up to 2 milliseconds, thus ensuring virtually trouble-free protection.

High and low AC Main line voltages are another major contributor to equipment failures. The ECM modules support Extreme Voltage Shutdown (EVS) circuitry when used with an ETA-ECS6RM controller, which enables the module to be shut Off during high and low AC line conditions. High line voltages or surges usually are a slower steady state rise in voltages ranging from 128VAC and up. They can be caused by fluctuations in the utility company’s power lines or by industrial equipment turning On and Off when it is on the same power leg of the building’s incoming AC. Low line voltages or brownouts occur when the AC Mains drops below 107VAC. Most of the time it is caused by the utility company not being able to supply enough power during heavy utility consumption time periods, such as heat waves. Another factor can be from voltage drops in AC lines due to long transmissions. The ETA-ECS6RM will inform you if any of these conditions occur. Extreme variances in unstable AC Mains voltage are one of the main reasons for equipment failure.

KEY FEATURES

•Manual/Auto On/Off Switch

•Incoming AC Present LED

•Active LED

•AC Fault LED

•Clamping Spike & Surge Suppression EVS Circuitry

•AC Mains Voltage Monitoring

APPLICATIONS

The following are just a few examples of applications where the ETA-ECM30 can be used:

•Restaurants

•Houses of Worship

•Schools

•Home Theaters

•Office Buildings

•Sports Bars

•Industrial Facilities

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 5 –

ETAsys.com

Specifications are subject to change without notice.

ETA-ECM30 specifications

The ETA Systems ETA-ECM30 is a cutting-edge energy management and monitoring solution designed for efficient power distribution and optimization across various applications. This advanced system is built to cater to the needs of both commercial and industrial settings, providing robust functionalities that ensure optimal energy utilization.

One of the standout features of the ETA-ECM30 is its real-time monitoring capability. The device continuously tracks energy consumption patterns, allowing users to make informed decisions to enhance efficiency and lower operational costs. The high-resolution display provides clear visual data, highlighting key metrics such as voltage, current, power factor, and total energy consumption. These metrics are crucial for identifying areas that require improvement.

Incorporating advanced communication technologies, the ETA-ECM30 supports various protocols including Modbus, Ethernet, and RS-485. This ensures seamless integration with existing infrastructure, facilitating remote monitoring and control. The ability to interact with other intelligent devices within an energy management system creates a cohesive network, enabling sophisticated automation and optimization strategies.

The ETA-ECM30 also boasts extensive data logging capabilities, archiving historical data that can be analyzed to identify trends over time. This functionality is essential for predictive maintenance and long-term planning, providing users with insights that can lead to significant operational improvements.

Safety and compliance are paramount in energy systems, and the ETA-ECM30 meets high standards in both areas. It features overload protection, surge suppression, and fault detection, ensuring the safety of both the equipment and users. Furthermore, it complies with industry regulations and standards, making it a reliable choice for discerning businesses.

User-friendliness is another essential aspect of the ETA-ECM30. The device is designed with an intuitive interface, making it accessible for users with varying levels of technical expertise. Easy navigation allows for quick setup and configuration, reducing the time and effort needed to get the system operational.

In summary, the ETA Systems ETA-ECM30 is an innovative energy management solution that combines real-time monitoring, advanced communication technologies, comprehensive data logging, and robust safety features. Its user-friendly design and high compatibility make it an ideal choice for businesses aiming to enhance their energy efficiency and reduce costs while complying with safety standards. Whether in a commercial or industrial environment, this system is equipped to deliver superior performance and reliability.