Graco Inc 224892, 224895, 224894, 224893, 308178 Symbols, Equipment Misuse Hazard

Page 2

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

INSTRUCTIONS

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated component in your system. See Technical Data on page 16.

DUse fluids and solvents that are compatible with the equipment wetted parts. Refer to the Technical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 82_C (180_F) or below –40_C (–40_F).

DWear hearing protection when operating this equipment.

DDo not lift pressurized equipment.

DComply with all applicable local, state, and national fire, electrical, and safety regulations.

2308178

Image 2
Contents Instructions-Parts List Table of ContentsSymbols Equipment Misuse HazardToxic Fluid Hazard System Pressure InstallationPressure Relief Procedure Fluid CompatibilityKEY Air Exhaust Ventilation InstallationGeneral Information Flushing the System Operation and MaintenanceOperating the Surge Suppressor ShutdownTroubleshooting Problem Cause SolutionServicing the Diaphragm and Shaft ServiceServicing the Shaft O-Rings Servicing the Fluid Inlet and Outlet Air inlet 1/4 nptf Chamfer faces out Parts Drawing 110004 *15Parts Lists Part Description QtyRepair Kits Dimensional Drawing Technical Data Manual Change Summary308178 Page 308178 Graco Standard Warranty Graco Information